The size of Dodge Ram wheels can vary depending on the specific model and year. The wheel size chart for the Dodge Ram 1500 indicates that a wide selection of styles and sizes are available for any taste, and installation is generally straightforward. The offset range for the Ram Rebel is listed as 17.1-21.1, but it is not specified whether it is positive or negative. It is important to note that different models and years of the Dodge Ram may have different wheel specifications, so it is recommended to consult the specific model’s documentation or a trusted source for accurate information.
Contents
- What size are stock Dodge Ram rims?
- What size rims are on a 1500 Dodge Ram?
- What size rims are on my RAM 1500?
- Are Ram and Chevy bolt pattern the same?
- What size are my factory rims?
- What size is a 5.7 Hemi?
- What is the bolt pattern on a RAM 1500?
- What are the factory size tires on a RAM 1500?
- What size tires are on a RAM 1500 5.7 Hemi?
- What lug pattern does Dodge use?
What size are stock Dodge Ram rims?
The average stock wheel size for the Ram 2500 is 17 to 20 inches. Due to the lower ground clearance, many Ram 2500 owners look to upgrade their tire size to the maximum possible size to boost that clearance. The maximum tire size you can upgrade to on a Ram 2500 without a lift is 35 inches with a 12.5-inch width.
What size rims are on a 1500 Dodge Ram?
Wheel Size: The 5-stud Ram 1500 models typically require wheels with a diameter ranging from 17 to 22 inches. However, the most common wheel sizes are 18 inches and 20 inches, providing a balance between style and performance. Wheel Width: For optimal fitment, consider wheel widths within the range of 8 to 10 inches.
What size rims are on my RAM 1500?
Wheel Size: The 5-stud Ram 1500 models typically require wheels with a diameter ranging from 17 to 22 inches. However, the most common wheel sizes are 18 inches and 20 inches, providing a balance between style and performance.
Are Ram and Chevy bolt pattern the same?
If it’s wheels, yes the lug pattern is the same. Only thing that might cause an issue is the center bore of the wheels. They might not fit over the hubs.
What size are my factory rims?
HOW TO READ TIRE RIM SIZE. One way to determine the rim size for your vehicle is to look at the alphanumeric tire size code located in the owner’s manual, driver’s side door jamb, or inside the glove box door. Look for a code like P215/65 R15 95H.
What size is a 5.7 Hemi?
345 cubic-inches
It displaced 5.7 liters (345 cubic-inches for you old-school fans). The 5.7L HEMI engine replaced the tried-and-true 5.2L (318) and 5.9L (360) Magnum engines whose roots share some of Chrysler’s LA small block architecture along with AMC cylinder head magic.
What is the bolt pattern on a RAM 1500?
There are five bolts used to attach the Ram 1500 Classic wheels to its hub and six on the Ram 1500 DT — each 5.5 inches (139 mm) apart.
What are the factory size tires on a RAM 1500?
2019-2024 Dodge RAM 1500 (V DT)
The current and fifth generation RAM 1500 from 2019-2024 utilizes tires from 18 inches up to 22 inches, depending on the truck’s trim level. This generation comes equipped with more modern tire sizing options, as the 16″, 17″ and 19″ were removed.
What size tires are on a RAM 1500 5.7 Hemi?
5th Generation (2019–Current)
| Configuration | Tire Size |
|---|---|
| Limited | 275/55R20 285/45R22 |
| Lone Star | 275/65R18 275/55R20 |
| Rebel | 275/70R18 |
| Tradesman | 275/70R18 275/55R20 |
What lug pattern does Dodge use?
The Dodge Charger bolt pattern for the years 1966-1978 is 5×4.5″ (5×114.3mm). Model years 1982-1987 have a Dodge Charger lug pattern of 4×3.94″ (4x100mm). Lastly, the Dodge Charger bolt pattern for the model years 2005 to present are 5×4.53″ (5x115mm).
