What rear axle is in a 2002 Chevy 2500HD?

The rear axle in a 2002 Chevy 2500HD can vary depending on the specific configuration and options of the vehicle. To determine the rear axle ratio for a particular 2002 Silverado, you can use the manufacturer’s codes. These codes can be decoded to provide information about the vehicle’s options, including the axle ratio. However, it can be challenging to determine the rear axle ratio through a simple visual inspection.
If you have the RPO (Regular Production Option) codes for your 2002 Chevrolet Silverado, you can use them to determine the axle ratio. These codes can be found on a sticker in the glove box or on the inside of the driver’s side door. Once you have the RPO codes, you can enter them on a website that provides RPO code decoding. This will display the options information for your vehicle, including the axle ratio.
Please note that the specific rear axle in a 2002 Chevy 2500HD can vary depending on the model, trim level, and other factors. It is recommended to consult the vehicle’s documentation or contact a Chevrolet dealership for the most accurate and specific information regarding the rear axle in a 2002 Chevy 2500HD.

Is a 2002 Chevy Silverado 2500HD a good truck?

Decent work truck that gets the job done.
Great diesel truck that has lots of power and can tow almost anything. Heavy duty suspension is rough with driving dry, but helpful with heavy loads. Seems to be more reliable than Ford Diesels and easier to fix.

What is the gear ratio for the rear end of a Chevy 2500?

This rear diff can be configured with either a 3.73 or 4.10 gear ratio, depending on the stock configuration of your 2500 Chevy pickup.

What is the gear ratio for a 2002 Chevy 2500hd?

3.73
Gear ratio 3.73. With 11.5 Ring Gear.

What is the gear ratio for the rear axle on a 2002 Chevy 2500HD?

3.73:1
Using our 2002 Chevrolet Silverado 2500HD project as an example, the truck came from the factory with 3.73:1 axle gears.

What rear end do I have in my Chevy truck?

You can typically find your RPO code on driver side door panel or glove box. General Motors rear end differentials are referred to by the diameter of the ring gear, i.e. 7.5 inch, 8.5 inch, 10.5 inch.

How do I know what rear differential is in my Silverado?

Information about Differentials in GM vehicles can usually be obtained by looking at the RPO or “Regular Production Option” codes contained in the Service Parts Identification tag in the glovebox or the driver’s side door jamb (B-Pillar).

How much is a 2002 Silverado 2500 worth?

How much is a 2002 Chevrolet Silverado 2500 worth? The value of a used 2002 Chevrolet Silverado 2500 ranges from $1,007 to $5,035, based on vehicle condition, mileage, and options.

What is a 3.73 axle ratio good for?

The higher the ratio, the more revolutions per minute. Towing: For pickup trucks released after 2010, the best axle ratio for towing falls somewhere between 3.55 and 3.73. This range provides good acceleration for V8 gas and diesel engines.

How do I know what Chevy axle I have?

To find the axle gear ratio of any GM vehicle, locate the RPO sticker (typically located in the glove box) and write down any codes starting with F, G, or H.

What is the difference between a 4.10 and 3.73 truck?

The 4:10 will increase acceleration from a standstill but decrease fuel economy and raise engine rpm (shortens engine life because it turns more revolutions per mile). The 3:73 will offer less acceleration from standstill but increase fuel economy across the entire rev band.