Parking Sensor Part Number for Toyota FJ Cruiser
The part number for the parking sensor on a Toyota FJ Cruiser is 89341-33050. This part number is specifically for the reverse sensor and is priced at approximately $182.02 for a quantity of one.
If you need additional parts for the installation, the mounting bracket part number is 89348-45010 and the buzzer part number is 89747-51010. The computer module part number is 89340-35010, and the switch part number is 84490-35010.
It’s important to ensure that the parts you are purchasing are genuine Toyota OE parts to ensure proper fit and performance.
Contents
- Which sensor is used in parking sensor?
- Where is my parking sensor located?
- Can parking sensors be adjusted?
- Do parking sensors need to be recalibrated?
- Can parking sensors be repaired?
- What causes parking sensors to stop working?
- How do you reset a parking sensor?
- What is Toyota parking sensor?
- What is the parking sensor control?
- What can cause parking sensors to stop working?
Which sensor is used in parking sensor?
Ultrasonic sensors in the front and back bumpers of the car can detect objects. In most cars, the front sensors can detect objects up to four feet and the back sensors can detect objects up to eight feet.
Where is my parking sensor located?
As the name suggests, the parking sensor serves to provide a warning when an object or car is approaching from behind the car. This sensor is usually located on the front and rear bumpers of the car. Another function of this parking sensor technology is to prevent collisions with objects around the car.
Can parking sensors be adjusted?
Yes, they can be adjusted to sense movement from far away, as well as near distances. Adjustments can also be made depending on the sensitivity needed for the application. Additionally, some parking sensors are equipped with LED or audio alarms that alert drivers when they get too close to an object.
Do parking sensors need to be recalibrated?
Calibration or aiming may need to be done after removal of the bumper cover, removal of the sensor, or an impact on or near the sensor. Most OEMs do not require a calibration but call for a system test after installation. These tests may use a scan tool along with other special tools.
Can parking sensors be repaired?
When your parking sensors stop working properly, it’s due to a fault with your car’s electrics. A professional will find the cause of the issue and perform a repair to get your parking sensors working again.
What causes parking sensors to stop working?
If your parking sensors are covered in road dirt, dust or mud, they may not work as efficiently. The sensor may mistake dirt for a close object, therefore setting the sensors off incorrectly. So, it’s important to keep your parking sensors clean to ensure they are working as they should be.
How do you reset a parking sensor?
There you go you’re gonna have to hold the parking sensor until you hear that beep. So that’s resetting it and you won’t have any codes whatsoever. So that’s how you reset it guys.
What is Toyota parking sensor?
Display also indicates the relative location of the obstacle. Detected. It should be noted that the detection. Range is limited to an area near each sensor.
What is the parking sensor control?
Parking sensors use ultrasonic technology to detect obstacles around the vehicle, alerting the driver with audible or visual signals if they are too close to an object. This real-time feedback significantly reduces the risk of collisions and fender benders, protecting both the vehicle and surrounding objects.
What can cause parking sensors to stop working?
If your parking sensors are covered in road dirt, dust or mud, they may not work as efficiently. The sensor may mistake dirt for a close object, therefore setting the sensors off incorrectly. So, it’s important to keep your parking sensors clean to ensure they are working as they should be.
