Oil Used in a Chevy Cobalt
The type of oil used in a Chevy Cobalt depends on the year and trim level of the vehicle. Typically, Chevy installs A5W-30 synthetic lubricant in its vehicles from the factory. The 2.2L engine in the Cobalt requires a little over 5 quarts of oil, including the filter. It is recommended to change the oil in a Cobalt every 7,500 miles or every 12 months, assuming the recommended synthetic oil is used. For conventional oil, it is recommended to change it every 3,000 miles or at 3 months.
Please note that the specific oil requirements may vary depending on the year and trim level of the Chevy Cobalt. It is always best to consult the owner’s manual or contact a Chevrolet dealership for the most accurate and up-to-date information.
I hope this helps! Let me know if you have any other questions.
Contents
- What oil does 2009 Chevy Cobalt use?
- Does a 2009 Chevy Cobalt take synthetic oil?
- What oil does a 2010 Chevy take?
- What happens if you put regular oil in a synthetic car?
- Does a 2008 Chevy Cobalt take synthetic oil?
- What oil is recommended for a 2007 Chevy Cobalt?
- What kind of oil does a 2010 Cobalt take?
- Does a 2006 Chevy Cobalt take synthetic oil?
- What is the best oil for a 2005 Chevy Cobalt?
- What is the best oil for 2009 Chevy?
What oil does 2009 Chevy Cobalt use?
5W-30
AMSOIL OE 5W-30 100% Synthetic Motor Oil.
Does a 2009 Chevy Cobalt take synthetic oil?
Notes: Full synthetic. 5W-30.
What oil does a 2010 Chevy take?
Notes: OE Recommendation, Full synthetic. 5W-30.
What happens if you put regular oil in a synthetic car?
Can You Mix Conventional Oil With Synthetic? The short answer is yes. There is no danger or risk of combustion, and mixing the two types of oil won’t harm your engine. However, it’s important to note that if you do mix the two, the conventional oil can keep the synthetic from performing to its fullest potential.
Does a 2008 Chevy Cobalt take synthetic oil?
Notes: Full synthetic. 5W-30. 5 quart.
What oil is recommended for a 2007 Chevy Cobalt?
5W-30
5W-30 – SAE 5W-30 is preferred. Capacity: With filter 5.1 quarts. After refill check oil level.
What kind of oil does a 2010 Cobalt take?
5W-30
Oil Grade: SEO23
| Viscosity: | All TEMPS….5W-30 |
|---|---|
| Capacity: | With filter 5 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…18 ft/lbs |
Does a 2006 Chevy Cobalt take synthetic oil?
Notes: Full synthetic. 5W-30.
What is the best oil for a 2005 Chevy Cobalt?
Mobil 1 Full Synthetic Engine Oil 5W-30 1 Quart
5W-30.
What is the best oil for 2009 Chevy?
Use only an oil that meets GM Standard GM6094M. Temperatures above -20°F (-29°C), SAE 5W-30 is best for the vehicle. These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils such as SAE 10W-40, SAE 20W-50 or any other viscosity grade oil not recommended.
