What oil is best for Subaru Impreza?

According to the search results, the best oil for a Subaru Impreza depends on the specific model and year. Here are the recommendations:
– If your Subaru Impreza is a 2011 or newer model, it is required to use synthetic oil. Subaru recommends using Genuine Subaru oil with a viscosity of 0W-20 in these engines, as it is designed for improved fuel economy and increased power. For the turbocharged engine in the WRX and WRX STI, Subaru recommends using 5W-30 synthetic oil, which provides increased protection against breakdown and superior lubrication for optimal fuel economy.
– It is important to note that the specific oil requirements may vary depending on the model year and engine type of your Subaru Impreza. For example, older models may require conventional oil or have different viscosity recommendations. It is always best to consult your vehicle’s owner’s manual or contact a Subaru dealership for the most accurate and up-to-date information on the recommended oil for your specific Subaru Impreza model.
Remember to follow the manufacturer’s recommendations for oil change intervals and consider any extreme driving conditions that may require more frequent oil changes.

Can you put 5w30 in a Subaru Impreza?

If you drive a Subaru Impreza model that’s from the 2012 model year or newer, OEM synthetic Subaru oil (0W-20 synthetic oil) is a must. If you drive a model from between 2002 and 2012, you should use 5W-30 conventional oil.

What is the difference between Subaru 5w30 and 0w20?

What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity. As shown below, the 5W-30 is specially formulated for turbos that run at hotter temperatures. The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.

What happens if I put 5W20 instead of 0w20?

5W-20 has a similar viscosity level to 0W-20, also suited to low temperature climates, but has a slightly thicker oil viscosity than the latter. Alternating between the two may not cause any immediate damage, but it will severely affect your oil change interval length and overall engine performance over time.

Do Subarus require full synthetic oil?

If your Subaru is a 2011 or newer Forester, a 2012 or newer Impreza, or a 2013 or newer Outback, Legacy, Crosstrek, or BRZ, or Ascent – it is REQUIRED to use synthetic oil.

Do Subarus need special oil?

Most Subaru models with turbocharged engines use Subaru Synthetic 5W-30 Motor Oil.

Why does Subaru use 0W-20?

What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity. As shown below, the 5W-30 is specially formulated for turbos that run at hotter temperatures. The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.

What oil should I use in my Subaru Impreza?

Oil Type & Capacity for Subaru Impreza
As far as engine oil goes, the Impreza will match the Crosstrek. This means that 0W-20 synthetic oil is recommended, but 5W-30 conventional oil can be used if needed.

Why does Subaru use 0W 20 oil?

What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity. As shown below, the 5W-30 is specially formulated for turbos that run at hotter temperatures. The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.

What oil can I use instead of 0w20?

If SAE 0W-20 synthetic oil is not available, SAE 5W-20 conventional oil may be used. However, it must be replaced with SAE 0W-20 synthetic oil at the next oil change.

Can I use 5W-30 instead of 0W-20?

Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine. Thus, always refer to the manufacturer’s recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.