What oil does Toyota Corolla use?

Toyota Corolla Engine Oil Recommendation
The recommended engine oil type for the Toyota Corolla varies based on the model year and specific engine type. For the 2020 Toyota Corolla, the recommended engine oil type is 0W-16, with a capacity of 4.4 quarts. It’s important to note that if SAE 0W-16 oil is not available, 0W-20 oil may be used, but it must be replaced with SAE 0W-16 at the next oil change.
It’s crucial to follow the owner’s manual recommendation for the specific oil type and capacity for your Toyota Corolla, as using the correct oil is essential for the engine to run smoothly and avoid potential issues such as knocking noise, bad gas mileage, and engine damage.
If you have any further questions about the specific oil type and capacity for your Toyota Corolla, it’s recommended to refer to the owner’s manual or consult with a certified technician at a Toyota service center for personalized assistance.

What is the best engine oil to service a Toyota Corolla?

Toyota advises using 0W-20 fully synthetic motor oil for Toyota Corolla models produced in 2009 or later. For Corolla models manufactured in 2008 or earlier, 5W-30 fully synthetic motor oil is recommended. The 0 and 5 numbers represent the temperatures, in degrees Fahrenheit, at which the oil is still functional.

Do Toyotas need special oil?

Most Toyota vehicles use synthetic or conventional motor oil. To verify which type of motor oil your vehicle needs, please take a look at the Owner’s Manual for your particular vehicle.

Can I use 5W-30 instead of 0W-20?

Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine. Thus, always refer to the manufacturer’s recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.

Do Toyotas need full synthetic oil?

Toyota Oil Change FAQs and Pricing
Schedule your Toyota oil change online or by phone today! What Kind of Oil Do Toyota Models Require? It is recommended by the manufacturer to use certified and approved oil in your vehicle. Toyota recommends Toyota Genuine SAE 0W-20 Full-Synthetic motor oil for new vehicles.

Do Toyota Corollas require synthetic oil?

What Toyota Corolla Oil Type Does Your Vehicle Need? For Toyota Corolla models made in 2009 or later, Toyota recommends using 0W-20 full synthetic motor oil. Meanwhile, Corolla models made in 2008 or earlier should use 5W-30 full synthetic motor oil.

What oil does Toyota recommend?

Genuine Toyota motor oil 0W-20 utilizes a Toyota-specific additive package that will provide the best results for oil performance and fuel economy. However, other 0W-20 synthetic oils can be used as long as they are ILSAC certified, which is found on the oil container label.

What happens if I use 0W-20 instead of 5W-20?

The meaning of the numbers has to do with oil thickness (viscosity) the w stands for winter or cold. So basically when an engine calls for 5w20 it needs a weight of 5 when cold and 20 when hot. By putting 0w20 into it you are providing too thin of oil which can harm the engine until it warms up.

Can I use 5W 20 instead of 0W 20?

Simply put, no. Some engine manufactures will say that 5w20 can be installed but 0w20 is preferred, especially if the engine was manufactured before the most recent change in API standards. But most newer engines were designed with tolerances designed specifically with 0w20 being installed.

Can I use 5W-30 oil on Toyota Corolla?

For Toyota Corolla models made in 2009 or later, Toyota recommends using 0W-20 synthetic motor oil. Meanwhile, Corolla models made in 2008 or earlier should use 5W-30 synthetic motor oil.

Can I use 5W 20 in my Toyota Corolla?

Only Answer. If SAE 0W-20 synthetic oil is not available, SAE 5W-20 conventional oil may be used. However, it must be replaced with SAE 0W-20 synthetic oil at the next oil change.