The oil type for a Subaru Outback XT depends on the model year. According to the search results, the recommended oil for a Subaru Outback XT (Turbo) from 2020 to 2021 is 0W-20 synthetic oil. It requires approximately 4.8 quarts of oil with a new oil filter and crush washer [[3]].
Please note that it’s always a good idea to consult your vehicle’s owner’s manual or contact a Subaru dealership to confirm the specific oil requirements for your Subaru Outback XT, as oil recommendations may vary depending on the model year and engine configuration.
Contents
- What oil does Subaru use from factory?
- Can I use 5W-30 instead of 0w20 in Subaru Forester?
- What oil does a 05 Outback XT take?
- What oil does Subaru use from the factory?
- Which engine oil is best for Subaru Outback?
- What does XT mean in Subaru Outback?
- What is the best oil for a Subaru boxer engine?
- Why does Subaru use 0W-20 oil?
- How much oil does a 2005 Subaru Outback 2.5 XT take?
- Can I use 5W 20 instead of 0W 20?
What oil does Subaru use from factory?
Subaru Oil Guide:
Model | Subaru Oil Required | Capacity |
---|---|---|
Subaru Legacy & Outback 6 Cyl. 2002 – 2019 | 5W-30 Conventional Oil | 6 – 6.9 Quarts |
Subaru Legacy & Outback XT (Turbo) 2020 – 2021 | 0W-20 Synthetic Oil | 4.8 Quarts |
Subaru WRX 2002 – 2010 | 5W-30 Conventional Oil | 4.4 – 5 Quarts |
Subaru WRX 2011 – 2020 | 5W-30 Synthetic Oil | 4.4 – 5.4 Quarts |
Can I use 5W-30 instead of 0w20 in Subaru Forester?
If you drive a Subaru Forester with a non-turbo engine, it requires 0W-20. If you drive a model with a turbo engine, you’ll need 5W-30.
What oil does a 05 Outback XT take?
SAE 5W-30
5W-30 (All TEMPS) – SAE 5W-30 is preferred. Capacity: 4.5 quarts (with filter).
What oil does Subaru use from the factory?
Synthetic 0W-20 is uniquely formulated to handle the low-friction design of Subaru non-turbocharged engines. Synthetic 5W-30 motor oil is required for 2011 and newer turbo-charged engines, and is recommended for prior year models.
Which engine oil is best for Subaru Outback?
Like the Crosstrek, the oil for the Subaru Outback needs to be an API classification SN or ILSAC GF-5. Also like the Crosstrek, the Outback engine should be filled with 0W-20 synthetic oil. If synthetic oil isn’t available, you can use either 5W-30 or 5W-40 conventional oil.
What does XT mean in Subaru Outback?
The XT in Touring XT refers to Subaru’s 2.4L boxer-four. Subaru has offered this turbocharged engine in the Outback since this generation launched. It’s a big power boost over the naturally aspirated 2.5L boxer engine offered in anything without that XT badge.
What is the best oil for a Subaru boxer engine?
For engines that aren’t turbo-charged, 0W-20 synthetic oil is your best Subaru Outback oil type. For older Subaru Outback models, the engine will thrive with a higher viscosity, so if your Outback has seen some miles and years, you can choose 5W-30 synthetic oil.
Why does Subaru use 0W-20 oil?
What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity. As shown below, the 5W-30 is specially formulated for turbos that run at hotter temperatures. The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.
How much oil does a 2005 Subaru Outback 2.5 XT take?
4.4 quarts
Oil Grade: SM
Viscosity: | All TEMPS….5W-30 – SAE 5W-30 is preferred. Above -4 F .10W-30, 10W-40 |
---|---|
Capacity: | With filter 4.4 quarts. After refill check oil level. |
Torque: | Oil Drain Plug…33 ft/lbs |
Can I use 5W 20 instead of 0W 20?
Simply put, no. Some engine manufactures will say that 5w20 can be installed but 0w20 is preferred, especially if the engine was manufactured before the most recent change in API standards. But most newer engines were designed with tolerances designed specifically with 0w20 being installed.