AHG Auto Service » Make » Honda » What oil does Honda CRZ use?

What oil does Honda CRZ use?

Honda CR-Z Engine Oil Type
The type of oil required for a Honda CR-Z depends on the specific engine it is fitted with. Here are the recommended oil types for different engine options:
– For the 2.4-litre four-cylinder engine used in the Honda CR-Z from 2007, the recommended oil is a quality 5W40, either synthetic or semi-synthetic.
– From 2012 to 2017, the CR-Z was also available with a two-litre petrol engine option, which requires a 0W20 as the first choice, but a 5W30 is also allowable for engines.
It’s important to note that using the correct oil filter is also crucial when changing the engine oil in a Honda CR-Z to avoid putting clean oil through an old, dirty filter.
Oil Change Frequency and Recommendations
The frequency of oil changes for a Honda CR-Z depends on the type of oil used and driving habits. Here are some general guidelines:
– Depending on the type of oil used and driving habits, the oil in a Honda CR-Z should be changed every 3,500-10,000 miles. Synthetic oil generally lasts longer than conventional oil and does not need to be changed as often.
– Honda CR-Zs are recommended to use full synthetic 0W-20 motor oil, which meets the specifications set forth by Honda and ensures proper lubrication of all mechanical parts in the engine.
It’s important to consult the owner’s manual for the specific oil change intervals and recommendations for the Honda CR-Z.
Oil Standards and Recommendations
Honda recommends using Honda Genuine Motor Oil for the CR-Z. However, they also allow for the use of premium-grade conventional motor oil or a full synthetic blend as an alternative, provided that the oil meets the viscosity grade requirements listed in the owner’s manual and is labeled with an API Certification Seal.
In summary, for the Honda CR-Z, the recommended oil types are 5W40 for the 2.4-litre four-cylinder engine and 0W20 as the first choice for the two-litre petrol engine, with a 5W30 also allowable. Additionally, the frequency of oil changes and the specific oil standards should be followed as per the owner’s manual and driving habits.

What type of oil does a Honda CR-Z take?

Oil Grade: API*

Viscosity: 0W-20 (All TEMPS)
Capacity: 3.8 quarts (with filter). After refill check oil level.
Capacity: 3.6 quarts. w/of. After refill check oil level.
Torque: 29 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug.

What engine does Honda CRZ use?

1.5 SOHC i-VTEC
HONDA CR-Z

ENGINE 1.5 SOHC i-VTEC
Capacity cc 1497
Compression ratio 10.4
Max. Power (Engine) kW/PS 84/114
@ rpm 6100

What is the best engine oil for Honda hybrid?

Information

Accord 2003-2010 L4 & V6: 5W-20 (S/UFS), topped off with 0W-20 (UFS) 2011-2020 L4 & V6: 0W-20 (UFS) 2005-2007 Hybrid: 5W-20 (S/UFS) 2014-2020 Hybrid or Plug-in: 0W-20 (UFS)
Passport 2019: 0W-20 (UFS)
Pilot 2003-2011: 5W-20 (S/UFS), topped off with 0W-20 (UFS) 2012-2020: 0W-20 (UFS)

What kind of oil does a Honda CR take?

Honda CR-V Oil Type: 0W-20
The recommended Honda CR-V oil type is, you guessed it, 0W-20. A full-synthetic grade is recommended for your Honda CR-V.

What kind of oil does a 2015 Honda CRZ take?

0W-20
Notes: OE Recommendation, Full synthetic. 0W-20. 1 quart container.

Do I need to use synthetic oil in my Honda?

Several brands, including Honda, don’t specifically require synthetics for their engines, but the low-viscosity oils that those engines need are offered only in a synthetic format, Yu says. Some brands use “synthetic blend” oil, which is a combination of conventional and synthetic oils.

What oil does a Honda CRZ 2015 take?

0W-20
Oil Grade: API*

Viscosity: 0W-20 (All TEMPS)
Capacity: 3.8 quarts (with filter). After refill check oil level.
Capacity: 3.6 quarts. w/of. After refill check oil level.
Torque: 30 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug.

Is there a special oil for hybrid cars?

Due to these facts, it is recommended that hybrid car owners use: The hybrid oil, that has a cooling character of 0W or 5W. The hybrid oil, that has viscosity layers with a smooth-running character of SAE 20, 30 or lower.

Can I use 5w20 instead of 0w20?

Both 5w-20 and 0w-20 are IDENTICAL once the car is up to temperature. The difference is how thin those oils are when the car is cold. Neither the 0w or the 5w flow enough in the cold to properly lubricate your engine. However, the 0W is thinner and does LESS damage at start up than the 5W oil.

Do hybrids require special oil?

No, because hybrid cars are largely powered by combustion engines. They also require the same range of lubricants as these vehicles. You need engine oil, transmission oil, greases and coolant.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment