The Ford Flex uses different types of oil depending on the engine it has. Here are the details:
The Ford Flex has an oil capacity of six quarts, regardless of the engine version. The type of oil you’ll need for an oil change will depend on which engine your Flex has.
According to the Flex Manual, the recommended oil for the regular 3.5-liter V6 engine is Motorcraft SAE 5W-20 or an equivalent SAE 5W-20 oil meeting Ford specification WSS-M2C930-A. This oil provides optimum fuel economy and durability performance for your vehicle’s engine.
For the 2019 Ford Flex with a 3.5 L V6 engine, the recommended oil type is 5W-20 synthetic blend.
It’s important to note that synthetic oil is recommended by some owners and dealerships for better engine performance and protection. However, it’s always best to consult your vehicle’s manual or contact a Ford dealership for the most accurate and up-to-date information on the recommended oil for your specific Ford Flex model and engine.
Please let me know if there’s anything else I can help you with!
Contents
- What kind of oil does a Ford Flex take?
- What type of oil does a 2010 Ford Flex take?
- What kind of oil does a 2012 Ford Flex EcoBoost take?
- Can I use 5w30 instead of 5w20 in my Ford?
- What oil goes in a 2012 Ford Flex?
- What is Ford’s recommended oil?
- What oil does a 2011 Ford Flex take?
- Does Ford use full synthetic oil?
- What is the best oil for a 2012 Ford Flex?
- What kind of oil does a 2009 Ford Flex take?
What kind of oil does a Ford Flex take?
Oil Grade: SEO89
Viscosity: | Above -20 F .5W-30 – To improve cold start in extreme climates where the ambient temperature is -22 F (-30 C) or below use 0W-30 oil meeting WSS-M2C963-A1. |
---|---|
Capacity: | With filter 6 quarts. After refill check oil level. |
Torque: | Oil Drain Plug…20 ft/lbs |
What type of oil does a 2010 Ford Flex take?
Notes: Full synthetic. 5W-20. 5 quart.
What kind of oil does a 2012 Ford Flex EcoBoost take?
5W30
2011-2016, 2018-2019 Ford Flex 3.5L V6 EcoBoost. Notes: Premium Synthetic Blend Motor Oil – Quart — Oil Refill – 6.0 qts; -5W30-QSP.
Can I use 5w30 instead of 5w20 in my Ford?
In 2011, Ford started recommending 5w30 for the turbocharged 3.5 Ecoboost engines, but they haven’t changed the recommendation for the non-turbo duratec. You can run both 5w20 or 5w30 safely on these engines (turbocharged and non-turbo). Both oils will work great.
What oil goes in a 2012 Ford Flex?
Oil Grade: SEO19
Viscosity: | All TEMPS….5W-30 |
---|---|
Capacity: | With filter 5.5 quarts. After refill check oil level. |
Torque: | Oil Drain Plug…20 ft/lbs |
What is Ford’s recommended oil?
Ford recommends using Motorcraft®* motor oil for your Ford vehicle. Using the right oil helps keep your vehicle’s engine clean, reduces overall wear, and maximizes performance.
What oil does a 2011 Ford Flex take?
Oil Grade: SEO60
Viscosity: | All TEMPS….5W-30 |
---|---|
Capacity: | With filter 5.5 quarts. After refill check oil level. |
Torque: | Oil Drain Plug…20 ft/lbs |
Does Ford use full synthetic oil?
Every Ford model has the required oil specification listed in the owner’s manual. High performance cars like the Mustang as well as turbocharged engines across the Ford lineup typically require synthetic engine oil. If your car doesn’t require synthetic oil, the choice is yours to make.
What is the best oil for a 2012 Ford Flex?
STP Conventional Engine Oil 5W-30 5 Quart
5W-30.
What kind of oil does a 2009 Ford Flex take?
5W-20
Notes: Full synthetic. 5W-20. 1 quart.