The Dodge Challenger uses different types of oil depending on the engine size. Here are the oil types and capacities for different engine options:
– The 3.6L V6 engine requires SAE 5W-20 oil and has a capacity of 5.9 quarts.
– The 5.7L V8 engine also uses SAE 5W-20 oil and can hold 7 quarts.
– The 6.2L V8 and 6.4L V8 engines require 0W-40 oil and have a capacity of 7 quarts.
It’s important to note that using the recommended oil type and capacity is crucial for the engine to run smoothly and avoid potential issues.
Contents
- What kind of oil does my 2018 Dodge Challenger take?
- What oil does Dodge use from factory?
- What is the best high mileage oil for a Dodge Challenger?
- What oil is best for Hemi?
- What oil do you use in Hemi?
- Can I use 5W-30 instead of 5w20 in my Dodge?
- What does Dodge recommend for oil?
- What oil does a Dodge Challenger V6 take?
- Can I put 5w30 instead of 5w20?
- What oil does a V6 Challenger use?
What kind of oil does my 2018 Dodge Challenger take?
“the challengers with a 3.6 liter engine, gt, sxt and sxt plus use 5w-20 or 0w-20 oil. while the r/t and the t/a are 5.7 liter eight cylinder engines, they use the same oil type as the previous three trims, just at a higher capacity.”
What oil does Dodge use from factory?
Dodge and Pennzoil®
Pennzoil and Dodge have a relationship rooted in passion and trust. Dodge has a fleet of vehicles that clearly demonstrate its drive for providing the highest quality drive possible. From the Dart to the Durango, a Pennzoil formulation comes factory filled.
What is the best high mileage oil for a Dodge Challenger?
- Valvoline High Mileage with MaxLife Technology Motor Oil SAE 5W-20 5W-20.
- Valvoline High Mileage 150K with MaxLife Plus Technology Motor Oil SAE 5W-20 5W-20.
- Valvoline Full Synthetic High Mileage with MaxLife Technology Motor Oil SAE 5W-20 5W-20.
- Valvoline Extended Protection Full Synthetic Motor Oil SAE 5W-20 5W-20.
What oil is best for Hemi?
Using the appropriate oil weight is critical, especially when you live in areas that experience extreme temperatures. If you have a RAM 1500 with a 5.7L HEMI, you should use an SAE 5W-20 synthetic blend motor oil. Typically, RAM 1500 trucks take six quarts during an oil change.
What oil do you use in Hemi?
SAE 5W-20
The RAM 1500 with the 5.7L V8 HEMI engine requires SAE 5W-20 full synthetic oil. Using synthetic oil means you can schedule oil changes for every 10,000 miles.
Can I use 5W-30 instead of 5w20 in my Dodge?
As long as the manual says 5w-30 is ok to use, is a suitable alternative if 5w-20 not available, the engine is ok. That makes sense. I’ll ask just out of curiosity, but the manual says it’s an acceptable alternative.
What does Dodge recommend for oil?
Pennzoil synthetic oil does NOT void the warranty of your Chrysler, Jeep, Dodge, or Ram and in fact Pennzoil synthetic is the recommended oil in all their vehicles.
What oil does a Dodge Challenger V6 take?
5W-20
6 liters 5W-20 Dodge Challenger engine oil, oil filter, and hardware for 3.6L V6 applications. Advanced RAVENOL USVO fully synthetic oil technology meets or exceeds recommended MS-6395 motor oil quality standards. Fits 2014-2021 Dodge Challenger 3.6L V6.
Can I put 5w30 instead of 5w20?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won’t cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it’s best to stick with it.
What oil does a V6 Challenger use?
Oil Grade: SEO11
| Viscosity: | All TEMPS….5W-20 |
|---|---|
| Capacity: | With filter 5.9 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…20 ft/lbs |
