What oil does a Subaru Tribeca use?

The Subaru Tribeca uses different engine oils depending on the model year. Here are some recommendations based on the search results:
– For the 2014 Subaru Tribeca and earlier models, the engine oil recommendations are not specified in the search results.
– One forum user recommends using high mileage oils due to leaky seal and gasket issues with Subarus. They specifically mention using Quaker State 5W30 in the winter and 10W30 in the summer.
– The official recommendation is to always use the SUBARU approved engine oil. If the approved oil is unavailable, an alternative oil that matches the same API classification and SAE viscosity can be used.
Please note that it is always best to consult the owner’s manual or contact a Subaru dealer for the most accurate and up-to-date information on the recommended engine oil for your specific Subaru Tribeca model and year.

Can I put 5w30 instead of 0w20 Subaru?

What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity. As shown below, the 5W-30 is specially formulated for turbos that run at hotter temperatures. The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.

Do Subarus need special oil?

Most Subaru models with turbocharged engines use Subaru Synthetic 5W-30 Motor Oil.

What oil does 06 Tribeca take?

Synthetic 5w-30 oil
2006 Subaru Tribeca Synthetic 5w-30 oil gallon – SOA427V1415 – Genuine Subaru Part.

How much oil does a Subaru Tribeca take?

Capacity: With filter 6.9 quarts. After refill check oil level.

What is the best oil to use in a Subaru?

For engines that aren’t turbo-charged, 0W-20 synthetic oil is your best Subaru Outback oil type. For older Subaru Outback models, the engine will thrive with a higher viscosity, so if your Outback has seen some miles and years, you can choose 5W-30 synthetic oil.

What kind of oil does a 2006 Tribeca take?

Synthetic 5w-30 oil
2006 Subaru Tribeca Synthetic 5w-30 oil gallon – SOA427V1415 – Genuine Subaru Part.

How many quarts of oil does a 2006 Subaru Tribeca take?

6 quarts
Capacity: With filter 6 quarts. After refill check oil level.

What oil is approved for Subaru engines?

Synthetic oil-specifically 0W-20-is highly recommended for optimal engine performance and protection. If synthetic oil isn’t available at the time of an oil change, 5W-30 conventional oil may be used instead.

What oil does a 2007 Subaru b9 Tribeca take?

Oil Grade: SM
All TEMPS…. 5W-30 – SAE 5W-30 is preferred. Capacity: With filter 6 quarts.

Do Subarus require full synthetic oil?

If your Subaru is a 2011 or newer Forester, a 2012 or newer Impreza, or a 2013 or newer Outback, Legacy, Crosstrek, or BRZ, or Ascent – it is REQUIRED to use synthetic oil.