Oil for Subaru BRZ
The Subaru BRZ requires synthetic 0w-20 oil for optimal performance and maintenance. This is a genuine Subaru part and is recommended for use in the Subaru BRZ.
It’s important to note that while there are various preferences and discussions about different oil brands and types, the manufacturer’s recommendation for the Subaru BRZ is synthetic 0w-20 oil. This oil is specifically designed to meet the requirements of the engine and ensure proper lubrication and performance.
When changing the oil in a Subaru BRZ, it’s essential to use the recommended oil type to maintain the engine’s reliability and performance. Always ensure that the oil cap is securely fastened after refilling and check the oil level to reach the optimal capacity.
If you have any further questions about maintaining your Subaru BRZ, feel free to ask!
Contents
- Should I use 5W-30 or 0W-20?
- What oil should I put in my BRZ?
- What kind of oil does a 2014 BRZ take?
- Does BRZ need synthetic oil?
- Can I use 5W-30 oil instead of 0W-20?
- What kind of oil does a 2018 Subaru BRZ take?
- Can I use 5W-20 oil instead of 0W-20?
- Can I put 5w30 instead of 0w20 Subaru?
- What type of oil does a 2013 BRZ take?
- Can I put 5W-20 instead of 0W-20?
Should I use 5W-30 or 0W-20?
0w20 engine oil typically outperforms 5w30 in terms of fuel efficiency. 0w20 oil offers superior fuel efficiency and performs better in cold weather, while 5w30 provides heightened high-temperature protection. However, the difference in fuel economy is typically marginal.
What oil should I put in my BRZ?
Genuine Subaru 0W-20 Synthetic Motor Oil is uniquely formulated to handle the low-friction design of the Subaru non-turbocharged engine, and is engineered for high performance in a wide range of operating conditions.
What kind of oil does a 2014 BRZ take?
Oil Grade: SM
Viscosity: | All TEMPS….0W-20 |
---|---|
Capacity: | With filter 5.7 quarts. After refill check oil level. |
Torque: | Oil Drain Plug…31 ft/lbs Install a new washer on the drain bolt. Only use an OE drain plug. |
Does BRZ need synthetic oil?
If your Subaru is a 2011 or newer Forester, a 2012 or newer Impreza, or a 2013 or newer Outback, Legacy, Crosstrek, or BRZ, or Ascent – it is REQUIRED to use synthetic oil.
Can I use 5W-30 oil instead of 0W-20?
Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine. Thus, always refer to the manufacturer’s recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.
What kind of oil does a 2018 Subaru BRZ take?
Mobil 1 – Extended Performance Full Synthetic Motor Oil 0W-20, 5 Quart (Part No. 15005)
Can I use 5W-20 oil instead of 0W-20?
Both 5w-20 and 0w-20 are IDENTICAL once the car is up to temperature. The difference is how thin those oils are when the car is cold. Neither the 0w or the 5w flow enough in the cold to properly lubricate your engine. However, the 0W is thinner and does LESS damage at start up than the 5W oil.
Can I put 5w30 instead of 0w20 Subaru?
Synthetic oil-specifically 0W-20-is highly recommended for optimal engine performance and protection. If synthetic oil isn’t available at the time of an oil change, 5W-30 conventional oil may be used instead. However, it should be replaced with synthetic oil at the next change.
What type of oil does a 2013 BRZ take?
0W-20 Synthetic Oil
Subaru Oil Guide:
Model | Subaru Oil Required | Capacity |
---|---|---|
Subaru BRZ 2013 – 2020 | 0W-20 Synthetic Oil | 5.7 Quarts |
Subaru Forester 2002 – 2010 | 5W-30 Conventional Oil | 4.4 Quarts |
Subaru Forester 2011 – 2021 | 0W-20 Synthetic Oil | 4.4 – 5.5 Quarts |
Subaru Forester XT 2004 – 2010 | 5W-30 Conventional Oil | 4.4 Quarts |
Can I put 5W-20 instead of 0W-20?
If SAE 0W-20 synthetic oil is not available, SAE 5W-20 conventional oil may be used. However, it must be replaced with SAE 0W-20 synthetic oil at the next oil change.