The oil type for a Dodge Ram 50 is not explicitly mentioned in the search results. However, it is worth noting that the Dodge Ram 1500, which is a different model, takes synthetic oil or a synthetic blend with API Certified SAE 5W-20 viscosity. It is always recommended to consult the vehicle’s owner’s manual or contact a Dodge dealership for accurate information on the specific oil type required for a Dodge Ram 50.
Contents
- How much oil does a 1988 Dodge Ram 50 take?
- What is the gas mileage on a 1988 Ram 50?
- What size engine is in a 1988 Dodge Ram 50?
- Can I use 10w30 instead of 5w20?
- How much does a 1988 Dodge Ram 50 weigh?
- What oil does a RAM 1500 05 take?
- What kind of oil should I put in my Dodge Ram?
- Can I put 5w30 instead of 5w20?
- What engine is in a 1989 Dodge Ram 50?
- What years was the Dodge Ram 50 made?
How much oil does a 1988 Dodge Ram 50 take?
Oil Grade: SJ
| Viscosity: | 5W-30, 5W-40 (Below 16) 10W-30, 10W-40, 10W-50 (Above -23) 20W-20, 20W-40, 20W-50 (Above 0) 5W-20 (Below 16) – SAE 5W-20 is not recommended for sustained high speeds. |
|---|---|
| Capacity: | 4 quarts (with filter). RWD. After refill check oil level. |
| Torque: | 26-32 ft/lbs (Oil Drain Plug) |
What is the gas mileage on a 1988 Ram 50?
19 combined
1988 Dodge Ram 50 Pickup
| EPA MPG | Owner MPG Estimates |
|---|---|
| 1988 Dodge Ram 50 Pickup 2WD 4 cyl, 2.0 L, Automatic 4-spd | |
| 19 combined city/highway MPG 18 city 20 highway 5.3 gals/ 100 miles | Not Available How can I share my MPG? |
| 1988 Dodge Ram 50 Pickup 2WD 4 cyl, 2.6 L, Manual 5-spd | |
| Regular Gasoline | Not Available How can I share my MPG? |
What size engine is in a 1988 Dodge Ram 50?
2.6L 4 -cyl
1988 Dodge RAM 50 PICKUP (2.6L 4 -cyl Engine Code [E] E) Motor Oil, Filters and Lubricants – AMSOIL.
Can I use 10w30 instead of 5w20?
10w30 is a thicker oil than 5w20, especially at higher temperatures. This means that 10w30 may provide more lubrication and sealing for older engines that have more wear and tear. 10w30 may also be harder to start in cold weather, and may increase the oil pressure and fuel consumption of your engine.
How much does a 1988 Dodge Ram 50 weigh?
| Dodge Ram D50 | |
|---|---|
| Dodge | |
| Height | |
| Wheelbase: | 109.4″ |
| Weight | 2500-3000 lb |
What oil does a RAM 1500 05 take?
SAE 5W-20 full synthetic oil
The RAM 1500 with the 5.7L V8 HEMI engine requires SAE 5W-20 full synthetic oil. Using synthetic oil means you can schedule oil changes for every 10,000 miles. Use seven quarts to refill after draining the old oil and replacing the filter.
What kind of oil should I put in my Dodge Ram?
The 3.6L Pentastar® V6 engine takes a synthetic blend oil. It’s preferred that you use one with an oil weight of SAE 0W-20. If you’ve got the 5.7L HEMI® engine, however, you’ll want to use synthetic oil that’s got a weight of SAE 5W-20.
Can I put 5w30 instead of 5w20?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won’t cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it’s best to stick with it.
What engine is in a 1989 Dodge Ram 50?
The proven and powerful 2.6-liter engine is standard on all three pictured models, and is backed by your choice of a standard five-speed overdrive manual or optional four-speed over- drive automatic transmission. Whichever truck you choose, you’re sure to find excitement in your own backyard and beyond.
What years was the Dodge Ram 50 made?
The Dodge Ram 50 pickup (known as the Dodge D50 from 1979 – 1980) was manufactured by the Japanese car manufacturer Mitsubishi Motors and marketed by the Chrysler Corporation from 1979 to 1993 under its own brand, Dodge. Plymouth also received a version, which was marketed under the Arrow Truck name from 1979 to 1982.
