What oil do I put in a Dodge Caliber?

The recommended engine oil for a Dodge Caliber depends on the specific engine type and model year. Here’s a general guide:​

🔧 Recommended Oil Types by Engine

• Gasoline Engines (2.0L, 2.4L I4): Use SAE 5W-20 engine oil that meets the Chrysler MS-6395 specification. This applies to most non-turbo models produced between 2007 and 2012. ​

• Diesel Engines (2.0L CRD): For European diesel models, SAE 0W-30 or 5W-30 oils are recommended. These oils should meet the appropriate ACEA specifications for diesel engines. ​

🧰 Oil Capacity

• Gasoline Engines: Approximately 4.7 liters (5.0 quarts) with a new oil filter.

• Diesel Engines: Approximately 6.5 liters (6.9 quarts) with a new oil filter.

❄️ Cold Weather Considerations

In colder climates, such as Odesa, Ukraine, using SAE 0W-20 synthetic oil can improve cold-start performance. This oil flows more easily at lower temperatures, providing better engine protection during cold starts. It’s compatible with engines that typically use 5W-20 oil.

🛢️ Recommended Oil Brands

Several reputable brands offer oils that meet the necessary specifications for the Dodge Caliber:​

• Valvoline: Offers full synthetic and high-mileage options in SAE 5W-20. ​

• Mobil 1: Provides advanced full synthetic oils suitable for various driving conditions.​

• STP: Offers high-mileage full synthetic oils in SAE 5W-20. ​

🛠️ Maintenance Tips

• Oil Change Interval: It’s generally recommended to change the engine oil every 5,000 to 7,500 miles (approximately 8,000 to 12,000 kilometers) or as specified in your owner’s manual.​

• High-Mileage Engines: If your Caliber has over 75,000 miles (120,000 kilometers), consider using high-mileage oil formulations to help reduce oil consumption and protect engine seals.​

What is the best oil for a 2008 Dodge Caliber?

Your oil needs to be changed out someday. Every 5,000 to 10,000 miles or so is a good rule of thumb. If You don’t replace it, there will be problems with the engine. The oil type recommended for the 2008 dodge caliber is sae 5w-20 synthetic motor oil.

What is the best oil for a Dodge Caliber 2011?

AMSOIL 5W-20 100% Synthetic High-Mileage Motor Oil.

What oil does a Dodge Caliber 2009 take?

5W-20
Oil Grade: SEO11

Viscosity:	All TEMPS….5W-20
Capacity:	With filter 4.3 litres. After refill check oil level.
Torque:	Oil Drain Plug…30 ft/lbs

What type of oil does a 2010 Dodge Caliber take?

5W-20
Oil Grade: SEO11

Viscosity:	5W-20 (All TEMPS)
Capacity:	4.5 quarts (with filter). After refill check oil level.
Torque:	30 ft/lbs (Oil Drain Plug)

Can I use 5W-30 instead of 5w20 in my Dodge?

As long as the manual says 5w-30 is ok to use, is a suitable alternative if 5w-20 not available, the engine is ok. That makes sense. I’ll ask just out of curiosity, but the manual says it’s an acceptable alternative.

Does Dodge use synthetic oil?

Again, there’s no manufacturer we’re aware of that makes this recommendation. Chrysler, Jeep, Dodge, Ram, Mercedes-Benz, Porsche, Corvette, Volkswagen, Hyundai and many other manufacturers’ vehicles come from the factory with synthetic oil. Myth: Using a synthetic oil voids a car’s warranty.

How much oil does a Dodge Caliber take?

Notes: Conventional high mileage. 5W-20. 5 quart.

Can I use 5w30 instead of 5w20 in my Dodge?

Having said that, 5w30 isn’t going to hurt anything. It says 5w30 is acceptable if 5w20 is not available, that’s all.

What type of oil does a 2012 Dodge Caliber take?

5W-20
Oil Grade: SEO11

Viscosity:	All TEMPS….5W-20
Capacity:	With filter 4.5 quarts. After refill check oil level.
Torque:	Oil Drain Plug…30 ft/lbs

What kind of oil does a Dodge Caliber use?

Mobil 1 – Advanced Full Synthetic Motor Oil 5W-20, 5 Quart (Part No. 14991)