Oil Recommendation for a Chevy HHR
Based on the information from various sources, including Chevrolet’s recommendations, it is advised to use 5 quarts of SAE 5w30 synthetic motor oil in a Chevy HHR. Synthetic motor oil is recommended for use in the vehicle. It is important to note that higher mileage engines may benefit from using a high-mileage oil or an oil additive to recondition and maintain engine seals .
Other Considerations
When changing the oil in a Chevy HHR, it is recommended to check other fluid levels and refill them as necessary. The HHR requires AF6 transmission fluid, DOT-3 brake fluid, and generic power steering fluid. Additionally, it is important to replace the oil filter every time the oil is changed, unless the car’s owner’s manual recommends otherwise .
Conclusion
To summarize, for a Chevy HHR, it is recommended to use 5 quarts of SAE 5w30 synthetic motor oil. It is also important to check and refill other fluid levels as necessary, and replace the oil filter during each oil change [[4]].
Contents
- What kind of oil does a Chevy HHR use?
- How much oil does a 2010 HHR take?
- Does Chevy take synthetic oil?
- What kind of oil does a 2010 Chevy HHR 2.2 take?
- What oil does a 2010 Chevy take?
- What kind of oil does a 2009 HHR SS take?
- How many quarts of oil does a Chevy HHR take?
- What kind of oil does a 2007 Chevy HHR take?
- Does Chevy require synthetic oil?
- What kind of oil does a 2010 HHR take?
What kind of oil does a Chevy HHR use?
SAE 5W-30
Oil Grade: SEO23
| Viscosity: | All TEMPS….5W-30 – SAE 5W-30 is preferred. Below -20 F .0W-30 |
|---|---|
| Capacity: | With filter 5 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…18 ft/lbs |
How much oil does a 2010 HHR take?
Chevy recommends using 5 quarts of sae 5w30 synthetic motor oil in their hhr.
Does Chevy take synthetic oil?
From conventional to full synthetic, your Chevrolet Certified Service experts offer a range of oil types, including ACDelco Conventional Oil, ACDelco dexos1TM Full Synthetic, and Mobil 1TM Full Synthetic. Ask the experts which grade of oil you should use for your specific Chevrolet model.
What kind of oil does a 2010 Chevy HHR 2.2 take?
STP Conventional Engine Oil 5W-30 1 Quart
Notes: Conventional. 5W-30.
What oil does a 2010 Chevy take?
Notes: OE Recommendation, Full synthetic. 5W-30.
What kind of oil does a 2009 HHR SS take?
Oil Grade: SEO23
0W-30 – If in area of extreme cold, where the temperature falls below the specified temperature range, use 5W-30 synthetic or 0W-30 meeting Original Equipment specifications.
How many quarts of oil does a Chevy HHR take?
Capacities
| Passenger volume (cu ft / L) | 97.4 / 2758 |
|---|---|
| Trailer towing maximum (lb / kg): | 1000 / 453 (LS & LT) not recommended (SS) |
| Fuel tank (gal / L): | 16.2 / 49 |
| Engine oil (qt / L): | 5 / 4.7 (all engines) |
| Cooling system (qt / L): | 2.2L: 7.4 / 7 2.4L w/ manual trans: 8.7 / 8.2 2.4L w/ auto trans: 8.5 / 8 2.0L: TBD |
What kind of oil does a 2007 Chevy HHR take?
5W-30
5W-30 – SAE 5W-30 is preferred. Capacity: With filter 5 quarts.
Does Chevy require synthetic oil?
Many modern Chevy vehicles require synthetic oil to help your engine last longer. You’ll save money over the long term since you have fewer oil changes in Brandon. Synthetic oil also helps you get a better return on your investment, and you can own your vehicle for longer periods of time.
What kind of oil does a 2010 HHR take?
AMSOIL OE 5W-30 100% Synthetic Motor Oil.
