Dodge Challenger Lug Pattern
The lug pattern for the Dodge Challenger is 5 x 115 mm. This means that there are 5 wheel studs spaced out at 115 mm from the edge of one to the center of the one diagonally across from it.
The factory recommended torque for tightening the lugs is 135 Ft-lbs, and it is recommended to tighten them working in a crisscross pattern to ensure the tire goes on squarely.
Contents
- What is the bolt pattern on a 2011 Dodge Challenger?
- Is 5×114 the same as 5×4 5?
- What lug pattern does Dodge use?
- Will a 5X114 3 fit a 5×115?
- What cars have 5×115 bolt pattern?
- What vehicles does 5×114 3 fit?
- What is the bolt pattern on a 2010 Challenger?
- What bolt pattern is 5×115?
- What does 5×115 convert to?
- Are Dodge and Chevy bolt patterns the same?
What is the bolt pattern on a 2011 Dodge Challenger?
5×115
Dodge Challengers come with a 5×115 bolt pattern and 18”, 19” or 20” rim diameters, depending on the year model and trim level of your Challenger.
Is 5×114 the same as 5×4 5?
While the numbers are different, the wheels themselves feature the same exact bolt pattern. So if you’re on the hunt for 5×4. 5 wheels and someone says you really need a 5×114. 3, you’ll know that you’re both talking about the same thing.
What lug pattern does Dodge use?
The Dodge Charger bolt pattern for the years 1966-1978 is 5×4.5″ (5×114.3mm). Model years 1982-1987 have a Dodge Charger lug pattern of 4×3.94″ (4x100mm). Lastly, the Dodge Charger bolt pattern for the model years 2005 to present are 5×4.53″ (5x115mm).
Will a 5X114 3 fit a 5×115?
So let’s answer the question of F5. By 114.3 Wheels can fit on a five by 115 volt pattern the simple answer is yes. It’s possible to fit those wheels on that bolt pattern.
What cars have 5×115 bolt pattern?
Wheels with a 5×115 bolt pattern can be found on a ton of great vehicles, including Buicks, Cadillacs, Chevrolets, GMs, Chryslers, Dodges, Pontiacs and more.
What vehicles does 5×114 3 fit?
The most popular cars with PCD 5×114,3 are: Honda Civic oraz Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3.
What is the bolt pattern on a 2010 Challenger?
All Dodge Challengers manufactured from 2008 onwards have a bolt pattern of 5 x 4.53 inches (5×115 mm).
What bolt pattern is 5×115?
The 5×115 bolt pattern is used by several car manufacturers such as Buick, Cadillac, Chevrolet, Chrysler, Dodge, and Pontiac. Aside from huge selection, when you order from us you also get fast and free shipping, and financing options, if needed.
What does 5×115 convert to?
BOLT PATTERN CONVERSION (mm to inches)
| COMMON REFERENCE | MILLIMETERS | INCHES |
|---|---|---|
| Five on One Twelve | 5×112 | 5×4.41 |
| Five on One Fourteen Point Three — or — Five on Four and a Half | 5×114.3 | 5×4.5 or 5×4 1/2 |
| Five on One Fifteen | 5×115 | 5×4.52 |
| Five on One Twenty | 5×120 | 5×4.72 |
Are Dodge and Chevy bolt patterns the same?
If it’s wheels, yes the lug pattern is the same. Only thing that might cause an issue is the center bore of the wheels. They might not fit over the hubs. In fact I think that’s what you’ll run into going from Chevy to dodge.
