What kind of transmission fluid goes in a Dodge Nitro?

Transmission Fluid for Dodge Nitro
The transmission fluid recommended for a Dodge Nitro is the Mopar ATF+4. This fluid is specifically designed to create a protective film between the metal components, reducing friction, cleansing surfaces, and improving the overall performance of the vehicle. It is essential to use the correct type of transmission fluid to ensure the longevity and smooth operation of the transmission system [[7]].
When adding or replacing transmission fluid in a Dodge Nitro, it is important to use approximately 4 quarts of ATF+4. The transmission is considered full when the fluid level is even with the bottom of the fill hole. It’s advisable to follow the manufacturer’s recommendations for the type and quantity of transmission fluid to maintain the optimal performance of the vehicle .
In summary, the recommended transmission fluid for a Dodge Nitro is the Mopar ATF+4, and approximately 4 quarts of this fluid should be used when adding or replacing transmission fluid.

What happens if you put the wrong transmission fluid in your transmission?

Driving with the wrong type of fluid can cause premature wear and tear of the transmission, issues with efficiency, and, unfortunately, high repair costs.

What’s the difference between ATF and Dexron transmission fluid?

Dextron is a General Motors approved trans fluid (there are a few versions), and ATF is a generic name for trans fluid. Dextron can and is used in many other makes of vehicles (not just GM), and you need to make certain you are putting the correct fluid in whatever car you own so research whatever applies.

Does it matter what transmission fluid I put in?

The type of transmission fluid you should use depends upon the make, model and year of your vehicle. For example, many General Motor cars will require a DEXRON fluid and Ford cars commonly specify a MERCON fluid. Always follow the vehicle manufacturer recommendation for proper fluid use and change interval.

How much transmission fluid does a Dodge Nitro need?

Automatic Transmission Fluid
Capacity: 4 speed 42RLE Total Fill 8.8 quarts. Capacity: 4 quarts Initial Fill.

How many quarts of transmission fluid does a 2011 Dodge Nitro use?

8.8 quarts
Automatic Transmission Fluid
Capacity: 4 speed 42RLE Total Fill 8.8 quarts. Capacity: 4 quarts Initial Fill.

What type of transmission fluid does a Dodge Nitro take?

ATF+4 Automatic Transmission Fluid
FRAM – ATF+4 Automatic Transmission Fluid: 1 Quart (Part No. F440)

Can I use Type F transmission fluid in a Dodge?

Does it hurt to put Type F tranny fluid in a Mopar instead of the Dexron? No. it will work fine in it and is recomended by most people for a firmer shift. just picked up a case of type F for my BB 727 swap this weekend myself.

How do I find out what kind of transmission fluid I need?

So how do you know what your transmission uses? The easiest way to make sure you’re using the right type of ATF is to check the owner’s manual. It’ll tell you exactly which ATF the manufacturer recommended for your car. You may also find a recommendation on the dipstick.

Can I drive my car with low transmission fluid?

Even with insufficient transmission fluid, you can still start and drive your manual vehicle for a few miles. Of course, this doesn’t mean you should. Every mile you force your transmission to endure without transmission fluid is likely to lead to some costly repairs.

What transmission fluid does a Dodge take?

This correct Dodge Charger transmission fluid can be identified as ZF 8 & 9 Speed ATF Automatic Transmission Fluid or equivalent, also known as Chrysler Mopar ATF part numbers 68218925AA, 68218925AB, 68339073AA, 668157995AA, or 68157995AB OEM part numbers.