Transmission Fluid for Subaru Forester
The type of transmission fluid required for a Subaru Forester depends on whether it has a manual or automatic transmission.
– Manual Transmission: The 2010 Subaru Forester uses API GL-5 75W-90 oil for manual transmissions.
– Automatic Transmission: For automatic transmissions, Subaru recommends using SUBARU ATF IDEMITSU ATF HP “Dexron III” Type Automatic Transmission Fluid. This fluid is also recommended for 2006 models and later, and can be used on older models as well.
It’s important to use the recommended transmission fluid to ensure optimal performance and longevity of the transmission system.
Contents
- What kind of transmission fluid do I need in a Subaru?
- What type of transmission fluid does a Subaru Forester use?
- Does a CVT need special fluid?
- Is ATF and CVT fluid the same?
- What is the difference between CVT fluid and ATF fluid?
- What happens if you put ATF instead of CVT?
- What happens if you put CVT fluid in a regular transmission?
- Can I use ATF instead of CVT fluid?
- How much transmission fluid does a Subaru Forester take?
- What type of transmission fluid does a Subaru CVT take?
What kind of transmission fluid do I need in a Subaru?
It’s important to get the right fluid for your Subaru’s transmission. As a general rule of thumb, you should put: ATF-HP transmission fluid into 2005+ Subaru vehicles (except those with CVT transmissions) DEXRON III transmission fluid into 2004 and earlier Subaru vehicles.
What type of transmission fluid does a Subaru Forester use?
Essential Subaru Forester Transmission Fluids Products
| Part Name | Part ID | Price |
|---|---|---|
| Pentosin – PENTOSIN ATF 44 1L | Part No. 1058112 | from $27.49 |
| Valvoline – High Mileage with MaxLife Technology Synthetic Blend 10W-30 Motor Oil: Maximize Engine Life, 5 Quart | Part No. 881161 | from $29.99 |
Does a CVT need special fluid?
The transmission fluid ensures the belt or chain remains in contact with the pulleys, which is why CVTs require specialized fluids rather than traditional automatic or manual transmission fluid. CVT fluids are formulated with the correct frictional requirements to guard against belt slipping.
Is ATF and CVT fluid the same?
The only things that’s make the different for CVT fluid is that the fluid has to produce more fiction rather than less fiction.
What is the difference between CVT fluid and ATF fluid?
ATF and CVT oils are chemically completely different fluids with different additives, base stocks, viscosities, friction coefficients, etc. Even if it wouldn’t cause extensive damage to a conventional automatic, it makes zero sense from an economic standpoint.
What happens if you put ATF instead of CVT?
One should never mix regular manual or automatic transmission fluid with CVT fluid or vice versa. While an advanced car can run with the wrong transmission fluid, it will end in damage. The worst is that the user might not even notice anything has gone wrong until the issues have already progressed.
What happens if you put CVT fluid in a regular transmission?
Ultimately your transmission will be destroyed. They are two different fluids with totally different viscosities, properties and additive packages, designed for different applications. If the car has not been driven drain the trans and fill with the correct fluid as recommended by your manufacturer.
Can I use ATF instead of CVT fluid?
CVT fluid is specially formulated for the particular friction requirements of the steel band and pulleys. ATF is made for clutches. If you accidentally put ATF in a CVT, you will need to completely drain and flush the unit.
How much transmission fluid does a Subaru Forester take?
about 10 quarts
A 2021 Subaru Forester transmission flush also uses about 10 quarts of fluid to completely clean and flush out the system.
What type of transmission fluid does a Subaru CVT take?
Idemitsu CVTF Type SB2 is specifically formulated to meet and/or exceed the latest performance and protection requirements of continuously variable transmissions in Subaru vehicles.
