What kind of transmission fluid does a Subaru crosstrek take?

The type of transmission fluid required for a Subaru Crosstrek depends on whether it has a manual or automatic transmission.
For manual transmissions, Subaru recommends using a manual transmission fluid that meets the API GL-4 standard. It is important to use a GL-4 oil to prevent damage to the bronze synchronizers in the transmission caused by the sulfur found in GL-5 oils.
For automatic transmissions, the fluid is typically referred to as ATF (Automatic Transmission Fluid). The specific type of ATF required for a Subaru Crosstrek may vary, so it is best to consult the owner’s manual or check with a trusted brand like Advance Auto Parts for the correct ATF product.
It is worth noting that Subaru’s maintenance schedule for the Crosstrek does not specify a need for transmission fluid replacement, although some people still choose to do it. However, if you decide to change the transmission fluid, it is important to use the recommended type of fluid for your specific transmission.
Please consult the owner’s manual or a trusted Subaru dealership for the most accurate and up-to-date information on the type of transmission fluid to use for your Subaru Crosstrek.

What kind of transmission fluid do I need in a Subaru?

It’s important to get the right fluid for your Subaru’s transmission. As a general rule of thumb, you should put: ATF-HP transmission fluid into 2005+ Subaru vehicles (except those with CVT transmissions) DEXRON III transmission fluid into 2004 and earlier Subaru vehicles.

Does a CVT need special fluid?

The transmission fluid ensures the belt or chain remains in contact with the pulleys, which is why CVTs require specialized fluids rather than traditional automatic or manual transmission fluid. CVT fluids are formulated with the correct frictional requirements to guard against belt slipping.

What happens if you use ATF instead of CVT fluid?

Using the wrong type of transmission fluid for high-tech vehicles can result in irreversible damage. One should never mix regular manual or automatic transmission fluid with CVT fluid or vice versa. While an advanced car can run with the wrong transmission fluid, it will end in damage.

What transmission fluid do I need for CVT transmission?

CVTs operate differently than automatic step transmissions, so they demand a different type of fluid. Valvoline Full Synthetic Continuously Variable Transmission (CVT) Fluid is uniquely formulated for today’s CVT transmissions.

What kind of transmission fluid does a 2017 Subaru Crosstrek take?

CVTF-II CVT Transmission Fluid
Subaru Genuine CVTF-II CVT Transmission Fluid (8 Quarts) – SOA427V1660 OEM AUTO Crosstrek Legacy Outback Forester Impreza.

What type of transmission fluid does a Subaru CVT take?

Idemitsu CVTF Type SB2 is specifically formulated to meet and/or exceed the latest performance and protection requirements of continuously variable transmissions in Subaru vehicles.

What type of transmission fluid does a 2018 Subaru Crosstrek take?

Valvoline CVT transmission fluid synthetic.

What kind of transmission fluid does a 2016 Subaru Crosstrek take?

AMSOIL 100% Synthetic CVT Fluid.

When should I replace CVT fluid Subaru Crosstrek?

Subaru CVT Transmission Fluid Service Special
For instance, Transmission Fluid Services vary from make to model and driver to driver, but typically the range is once every 30,000 to 60,000 miles.

Can I use ATF instead of CVT fluid?

CVT fluid is specially formulated for the particular friction requirements of the steel band and pulleys. ATF is made for clutches. If you accidentally put ATF in a CVT, you will need to completely drain and flush the unit.