Ford Transit Transmission Fluid Type
The type of transmission fluid required for a Ford Transit can vary based on the specific model and year. To find the recommended transmission fluid type for your vehicle, you can refer to your Owner’s Manual or visit Ford’s Chemicals and Lubricants website. The recommended transmission fluid type can be found in the Capacities and Specifications section of your Owner’s Manual or by accessing the transmission fluid chart on Ford’s website.
It’s important to note that automatic transmission fluids are typically referred to as ATF and are usually red or green to distinguish them from other types of oils. Additionally, it’s advisable to use the recommended standard for your Transit Connect, such as GL-4 oil, to ensure the proper lubrication and protection of the transmission components.
While there may be discussions about the frequency of transmission fluid changes, it’s essential to adhere to the manufacturer’s recommendations for maintenance and fluid replacement to ensure the optimal performance and longevity of your vehicle.
If you have any specific questions about the transmission fluid for your Ford Transit, it’s recommended to consult your Owner’s Manual or reach out to a certified Ford dealership for accurate guidance.
Remember to always refer to the specific recommendations for your vehicle to ensure the correct transmission fluid type and maintenance schedule.
Contents
- What type of ATF does Ford use?
- Can you use Dexron 3 transmission fluid in a Ford?
- What happens if you overfill transmission fluid?
- When did Ford switch to Mercon LV?
- How often should you change the transmission fluid in a Ford Transit?
- How many quarts of transmission fluid does a Ford Transit take?
- Is 4 quarts enough transmission fluid?
- Does it matter what type of ATF you put in your transmission?
- Is MERCON V and LV the same?
- Can you mix Mercon V and LV?
What type of ATF does Ford use?
MERCON® transmission fluids undergo extensive testing, both in the lab and in real-world conditions, to ensure they provide optimum performance and durability. MERCON® fluids are the only fluids approved by Ford Motor Company for their recommended application.
Can you use Dexron 3 transmission fluid in a Ford?
LUBRIPLATE Dexron III/Mercon is a premium fluid fully qualified to cover current requirements for both General Motors and Ford.
What happens if you overfill transmission fluid?
Excessive fluid prohibits proper lubrication and cooling and slows the rotating crankshaft, similar to the effect of running through water. When the air above mixes with the high levels of fluid, it creates a foamy substance that saturates the transmission. This can lead to: Part pitting.
When did Ford switch to Mercon LV?
2005 – MERCON LV
In December 2005, Ford released the Mercon “LV” fluid specification (M2C938-A).
How often should you change the transmission fluid in a Ford Transit?
Ford Transit Van Transmission Fluid
If you don’t routinely change your fluids at least every 30,000 miles or so, you may find that your Ford Transit Van transmission will slip.
How many quarts of transmission fluid does a Ford Transit take?
Automatic Transmission Fluid
Capacity: 3.5 quarts Initial Fill. Capacity: 6 speed 6R80 Total Fill 13.1 quarts.
Is 4 quarts enough transmission fluid?
Vehicles require an average of 4 to 17 US gallons (3.8 to 16 liters) of transmission fluid to fill; the majority of automobiles contain between 12 and 16 quarts (11.3 to 15.1 liters), depending on the car’s manufacture and other criteria.
Does it matter what type of ATF you put in your transmission?
The type of transmission fluid you should use depends upon the make, model and year of your vehicle. For example, many General Motor cars will require a DEXRON fluid and Ford cars commonly specify a MERCON fluid. Always follow the vehicle manufacturer recommendation for proper fluid use and change interval.
Is MERCON V and LV the same?
It is for all 2008 and newer Ford vehicles. Mercon V is not compatible with Mercon LV. I believe the LV is much thinner, if your car originally required V but the spec has been updated to LV I would stick with mercon V, as the thinner fluid could cause issues in transmissions made for thicker fluids.
Can you mix Mercon V and LV?
It is recommended that the two should not be mixed. Short answer: NO!!! Long answer: The LV stands for “low viscosity.” It is a fully synthetic ATF. It is not compatible with earlier Mercon fluids, so it should neither be mixed with Mercon or Mercon V used to replace those fluids.