What kind of transmission fluid does a Dodge Ram 3500 manual take?

Transmission Fluid for Dodge Ram 3500 Manual Transmission
The recommended transmission fluid for a Dodge Ram 3500 with a manual transmission depends on the API GL standard. If the recommended standard for your Ram 3500 is GL-4, you should use a GL-4 oil to avoid damaging the bronze synchronizers of your transmission with the sulfur found in GL-5 oils.
Automatic vs. Manual Transmission Fluid:
– For manual transmissions, the API GL standards are important, and using the correct type of oil is crucial to prevent damage to the transmission components.
– Automatic transmission fluids are usually called ATF, and it’s essential to use the type of oil recommended in the owner’s manual of your Ram 3500.
Type of Fluid:
– The recent Dodge Ram 3500 manual doesn’t use manual fluid; instead, it requires the automatic fluid +4 type. ATF+4 synthetic type is ideal for heavy-duty performance as it works in high or low temperatures and reduces oxidation.
In summary, for a Dodge Ram 3500 with a manual transmission, it is important to use the appropriate transmission fluid based on the API GL standard recommended for the vehicle to ensure the proper functioning and longevity of the transmission system.

Can you check transmission fluid in a manual?

Once you’ve cleaned the dipstick return the dipstick back to the original position. And remove it again doing. This will ensure a clear reading of the fluid. Check the level on the dipstick.

How do you check the transmission fluid on a Dodge Ram 3500 manual?

Start the engine and let it run for a few minutes to warm up. Ensure your car is in park, then open the hood. Locate the transmission fluid dipstick, usually situated to the right of the oil dipstick. Remove the dipstick and examine the fluid for clarity and a pink hue.

Is there a difference between automatic transmission fluid and manual transmission fluid?

One of the primary differences between ATF and MTF is their viscosity. ATF is thinner and smoother, whereas MTF is thicker and more weighty. This difference is due to the varied requirements of automatic and manual transmissions. Additives also differ significantly between the two.

How many quarts of transmission fluid does a Ram 3500 take?

Automatic Transmission Fluid
Capacity: 6 speed AS69RC Total Fill 13.7 quarts. Capacity: 7.2 quarts Initial Fill.

How many quarts of transmission fluid does a 6.7 Cummins take?

Recommended: BLUE DIAMOND ATF+4/DEXRON III/MERCON V transmission fluid. 22.0 QTS.

Is manual transmission fluid the same as clutch fluid?

No, clutch fluid is a hydraulic fluid and manual transmission oil is a thick 90 grade oil. Never substitute anything for clutch/brake fluid as it is a safety feature and could harm you as well as other road users.

What fluid is used in a manual shift transmission?

Manual transmission fluid, like engine oil, is generally brown to amber in color. Commonly recommended manual transmission fluid formulations include SAE 80W, 75W-90, 80W-90 and SAE 90. In some cases, a multi-grade engine oil or automatic transmission fluid may be recommended.

Do manual trucks take transmission fluid?

Yes, even a manual needs transmission fluid. The type of fluid can vary from car to car, however. Some manuals require conventional engine oil, and others function best with automatic transmission fluid. So make sure you’re putting in the fluid that’s specified for your car.

What transmission fluid does a Dodge Ram 3500 take?

The recommended ATF type used in the Chrysler 68RFE or 66RFE Ram 3500 6 speed transmissions is the ATF+4 specification fluid. The correct Ram transmission fluid can also be identified by the Chrysler MS-9602 type, or Mopar 68218057AA and ‎68218058AC transmission fluid part numbers.

How do you check and fill a manual transmission?

How to Check Manual Transmission Fluid

1. Lift the car up using a hydraulic floor jack, and secure it with jack stands. Get the vehicle high enough so that you have clearance underneath.
2. Find the fluid fill plug.
3. Remove the filler plug with a socket wrench, and check the level.
4. Add transmission fluid.