What kind of transmission fluid does a Chevy Spark use?

Transmission Fluid for Chevy Spark
The type of transmission fluid used in a Chevy Spark varies depending on the model year. For the 2013 Chevy Spark, the recommended transmission fluid is Dexron ViATF. On the other hand, the 2015 Chevy Spark requires Valvoline CVT fluid.
It’s important to note that the 2013 Chevy Spark has a sealed transmission, and to check the transmission fluid, one needs to remove the check valve bolt located under the car, as there is no dipstick for this model. Additionally, for the 2015 Chevy Spark, if it doesn’t have a dipstick and there are transmission issues or concerns about fluid levels, a visit to a dealership or mechanic is recommended.
The transmission fluid for the Chevy Spark is a critical component for the vehicle’s smooth operation, and it’s recommended to replace the transmission fluid every 30,000 to 60,000 miles. Proper maintenance of the transmission fluid is essential to ensure smooth shifting and prolong the life of the transmission.
In summary, for the 2013 Chevy Spark, the recommended transmission fluid is Dexron ViATF, while the 2015 Chevy Spark requires Valvoline CVT fluid. It’s important to follow the manufacturer’s recommendations for the specific model year to ensure optimal performance and longevity of the transmission.

Do Chevy Sparks have transmission problems?

If you don’t routinely and constantly change your fluids at least each 30,000 miles or so, you may find that your 2021 Chevy Spark transmission will instantly slip. Check your car’s owner’s manual for more details on the specific mileage intervals in which your transmission needs the fluid changed.

Does it matter what transmission fluid I use?

The type of transmission fluid you should use depends upon the make, model and year of your vehicle. For example, many General Motor cars will require a DEXRON fluid and Ford cars commonly specify a MERCON fluid. Always follow the vehicle manufacturer recommendation for proper fluid use and change interval.

How much CVT fluid does a 2015 Chevy Spark hold?

Capacity: CVT7 Total Fill 6.2 quarts.

How many quarts of transmission fluid does a 2014 Chevy Spark take?

6.1 quarts
Capacity: CVT7 Total Fill 6.1 quarts.

What transmission fluid does Chevy recommend?

DEXRON®-VI ATF
Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No. 883572)

How many quarts of transmission fluid does a 2013 Chevy Spark hold?

For Automatic Transmission: AW 80-40LE….SL130

Capacity:	4 speed AW 80-40LE Total Fill 5 quarts.
Capacity:	4.8 quarts Initial Fill.

What transmission does the Chevy Spark use?

Its transmission is a 5-speed manual, but you can swap it out for the continuously variable transmission, or CVT. You can do this with any of the four trims that the Spark has. The 2022 Chevy Spark is a smaller car with an engine that has 98 horsepower. It’s also has a manual 5-speed transmission.

What is a CVT transmission in a Chevy Spark?

Continuously variable transmissions don’t have high and low gears. Instead, CVTs use cone-shaped pulleys connected by an intervening belt or chain. The fixed side of the CVT doesn’t move, while the other side rotates according to your speed using a hydraulic cylinder.

What’s the difference between ATF and Dexron transmission fluid?

Dextron is a General Motors approved trans fluid (there are a few versions), and ATF is a generic name for trans fluid. Dextron can and is used in many other makes of vehicles (not just GM), and you need to make certain you are putting the correct fluid in whatever car you own so research whatever applies.

What kind of transmission fluid does a 2014 Chevy Spark take?

STP CVT Full Synthetic Transmission Fluid 1 Quart.