The type of transmission fluid that a Chevy S10 takes depends on whether it has an automatic or manual transmission. Here are the recommendations based on the search results:
– Automatic Transmission: For automatic transmissions, the recommended fluid for a Chevy S10 varies depending on the model year. According to the search results, the following types of transmission fluid are recommended:
– Dexron-IIi Automatic Transmission Fluid
– Dexron III/Mercon fluid
– Dexron 3 or Dexron 6
– Manual Transmission: For manual transmissions, the recommended fluid for a Chevy S10 is Synchromesh Transmission Fluid (GM Part No. 12345349).
It’s important to note that the specific type of transmission fluid may vary depending on the model year and other factors. To ensure the correct fluid for your Chevy S10, it’s always best to consult the owner’s manual or contact a trusted mechanic.
Please let me know if there’s anything else I can help you with!
Contents
- How much transmission fluid does a Chevy s10 take?
- What transmission does a 1996 s10 have?
- How many quarts does an s10 take?
- What transmission fluid does a s10 take?
- What transmission fluid does Chevy recommend?
- What kind of transmission fluid is in 1998 Chevy s10?
- Does a s10 have a 4L60E transmission?
- Does it matter what transmission fluid I use?
- What’s the difference between ATF and Dexron transmission fluid?
- What kind of transmission fluid does a 1995 Chevy s10 take?
How much transmission fluid does a Chevy s10 take?
11.2 quarts
Automatic Transmission Fluid
Capacity: 4 speed 4L60-E Total Fill 11.2 quarts. Capacity: 5 quarts Initial Fill.
What transmission does a 1996 s10 have?
5-speed manual
Used 1996 Chevrolet S-10 – Specs & Features
| Drivetrain | |
|---|---|
| Transmission | 5-speed manual |
| Drive type | Rear wheel drive |
How many quarts does an s10 take?
Oil Grade: API*
| Viscosity: | All TEMPS….5W-30 – SAE 5W-30 is preferred. Above 0 F .10W-30 |
|---|---|
| Capacity: | With filter 4.5 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…18 ft/lbs |
What transmission fluid does a s10 take?
Valvoline – ATF+4® Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No. 822348)
What transmission fluid does Chevy recommend?
DEXRON®-VI ATF
Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No. 883572)
What kind of transmission fluid is in 1998 Chevy s10?
For Automatic Transmission: 4L60-E….AF6
| Notes: | (1) This specification has been updated from Dexron II or III to Dexron VI per a Technical Service Bulletin from the manufacturer |
|---|---|
| Capacity: | 4 speed 4L60-E Total Fill 11.2 quarts. |
| Capacity: | 5 quarts Initial Fill. |
Does a s10 have a 4L60E transmission?
Automatic variants were equipped with either a 4L60 transmission, or a 4L60E transmission (depending on the year). Both gearboxes were extremely capable, but time and mileage can take their toll, resulting in many Chevrolet S-10 transmission problems.
Does it matter what transmission fluid I use?
The type of transmission fluid you should use depends upon the make, model and year of your vehicle. For example, many General Motor cars will require a DEXRON fluid and Ford cars commonly specify a MERCON fluid. Always follow the vehicle manufacturer recommendation for proper fluid use and change interval.
What’s the difference between ATF and Dexron transmission fluid?
Dextron is a General Motors approved trans fluid (there are a few versions), and ATF is a generic name for trans fluid. Dextron can and is used in many other makes of vehicles (not just GM), and you need to make certain you are putting the correct fluid in whatever car you own so research whatever applies.
What kind of transmission fluid does a 1995 Chevy s10 take?
AMSOIL 5W-30 Manual Synchromesh Transmission Fluid.
