The 2013 Ford Focus with the Powershift 6 Speed DCT (Dual Clutch Transmission) requires Motocraft XT-11-QDC Dual Clutch Transmission Fluid. You’ll need to use 2 quarts of this specific transmission fluid for the refill. The drain and fill plugs are located on the driver’s side, and it’s important to ensure that the car is level during the process. After draining the fluid and replacing the drain plug, use a gear oil pump to refill the transmission until the fluid reaches the bottom of the fill plug hole.
It’s crucial to use the correct transmission fluid for the 2013 Ford Focus, as using the wrong type of fluid can worsen any issues with the transmission. The Ford Motorcraft trans fluid is specifically recommended for this model, as it has the proper weight and additives for the dual clutch system on the 6-speed automatic transmission.
Contents
- What kind of transmission does a 2013 Ford Focus automatic have?
- How much transmission fluid does a 2013 Ford Focus hold?
- What kind of transmission fluid goes in a Ford Focus?
- How many quarts of transmission fluid does a Ford Focus take?
- What kind of transmission oil does a 2013 Ford Focus take?
- What transmission fluid does a 2013 Focus ST take?
- How much transmission fluid do I need for a 2013 Ford Focus?
- How much transmission fluid does a 2013 Ford Focus take?
- Does it matter what transmission fluid I use?
- Does a 2013 Ford Focus need transmission fluid?
What kind of transmission does a 2013 Ford Focus automatic have?
six-speed automatic
The Focus is powered by a 2.0-liter four-cylinder engine that teams with a five-speed manual transmission or a six-speed automatic, which uses a fast-acting dual-clutch design.
How much transmission fluid does a 2013 Ford Focus hold?
Capacities and Specifications
| Item | Capacity |
|---|---|
| Manual transmission fluid fill capacity. | 2.0 qt (1.9 L) |
| Power transfer unit fill capacity. | 0.8 qt (0.75 L) |
| Rear drive unit fill capacity. | 30.1 fl oz (890 ml) |
| Washer system fill capacity. | 1.2 gal (4.5 L) |
What kind of transmission fluid goes in a Ford Focus?
Mercon LV
Mercon LV 55 Gallon Drum. Automatic Transmission. Fluid. Oil.
How many quarts of transmission fluid does a Ford Focus take?
1.8 quarts
Adequate quantity of fluid needed for a complete Ford Focus MTF manual transmission fluid change. 2013-2018 Ford Focus ST Manual Transmission Fluid Capacity: 1.7 liters or 1.8 quarts. 2016-2018 Ford Focus RS Manual Transmission Fluid Capacity: 1.9 liters or 2.0 quarts.
What kind of transmission oil does a 2013 Ford Focus take?
Valvoline Dexron VI/Mercon LV ATF full synthetic.
What transmission fluid does a 2013 Focus ST take?
Motul Multi DCTF
Motul Multi DCTF is a high performance Technosynthese® lubricant works in 2013+ Focus ST & 2016+ Focus RS, 2014+ Fiesta ST which uses DCT transmission fluid. Thanks to its exclusive and dedicated formula, MULTI DCTF : – Provides anti-shudder performance to avoid vibrations on engine fly wheel.
How much transmission fluid do I need for a 2013 Ford Focus?
Adequate quantity of fluid needed for a complete Ford Focus MTF manual transmission fluid change. 2013-2018 Ford Focus ST Manual Transmission Fluid Capacity: 1.7 liters or 1.8 quarts.
How much transmission fluid does a 2013 Ford Focus take?
1.9 quarts
For Automatic Transmission: DPS6….SL026
Capacity: 6 speed DPS6 Total Fill 1.9 quarts.
Does it matter what transmission fluid I use?
The type of transmission fluid you should use depends upon the make, model and year of your vehicle. For example, many General Motor cars will require a DEXRON fluid and Ford cars commonly specify a MERCON fluid. Always follow the vehicle manufacturer recommendation for proper fluid use and change interval.
Does a 2013 Ford Focus need transmission fluid?
2013 Ford Focus transmission fluid changes are remarkably crucial to keep your vehicle’s transmission charming and lubricated. If you don’t routinely change your fluids at least every 30,000 miles or so, you may find that your 2013 Ford Focus transmission will slip.
