Based on the search results, a 2004 Chevy Trailblazer requires ATF Type III-H transmission fluid. It is important to note that the manual recommends checking and replacing the transmission fluid and filter every 50,000 miles or so if you do much of your driving in heavy city traffic, in high temperatures, in mountainous or hilly terrain, or if you use your vehicle for frequent trailer towing. If these conditions don’t apply, you can wait to change the fluid every 100,000 miles.
Please note that it’s always a good idea to consult your vehicle’s owner’s manual or contact a certified mechanic for the most accurate and up-to-date information regarding your specific vehicle.
Contents
- What type of transmission fluid does a Chevy TrailBlazer take?
- How many quarts of transmission fluid does a Chevy TrailBlazer take?
- What type of transmission fluid does a 2004 TrailBlazer take?
- What kind of transmission fluid does a 2004 Chevy take?
- How much transmission fluid does a 2004 Chevy Blazer take?
- Does it matter what transmission fluid I use?
- What kind of ATF does a 4L60E take?
- What transmission fluid does Chevy recommend?
- How many quarts of transmission fluid do I need for a 4L60E?
- What’s the difference between ATF and Dexron transmission fluid?
What type of transmission fluid does a Chevy TrailBlazer take?
FRAM – Full Synthetic Dexron VI Automatic Transmission Fluid: 1 Quart (Part No. F426)
How many quarts of transmission fluid does a Chevy TrailBlazer take?
For Automatic Transmission: 4L60-E….AF6
| Capacity: | 4 speed 4L60-E Total Fill 11.2 quarts. |
|---|---|
| Capacity: | 5 quarts Initial Fill. |
What type of transmission fluid does a 2004 TrailBlazer take?
A 2004 chevy trailblazer requires atf type iii-h transmission fluid.
What kind of transmission fluid does a 2004 Chevy take?
Dexron-VI ATF
General Motors recommends Dexron-VI ATF transmission fluid for use in all Chevy Silverado 1500 automatic transmissions.
How much transmission fluid does a 2004 Chevy Blazer take?
For Automatic Transmission: 4L60-E….AF6
| Notes: | (1) This specification has been updated from Dexron II or III to Dexron VI per a Technical Service Bulletin from the manufacturer |
|---|---|
| Capacity: | 4 speed 4L60-E Total Fill 11.2 quarts. |
| Capacity: | 5 quarts Initial Fill. |
Does it matter what transmission fluid I use?
The type of transmission fluid you should use depends upon the make, model and year of your vehicle. For example, many General Motor cars will require a DEXRON fluid and Ford cars commonly specify a MERCON fluid. Always follow the vehicle manufacturer recommendation for proper fluid use and change interval.
What kind of ATF does a 4L60E take?
DEXRON III
Transmission Fluid
| Manufacturer | Transmission Type | Transmission Fluid |
|---|---|---|
| CADILLAC | 4L60E | DEXRON III |
| CHEVROLET | 4L60E | DEXRON III |
| ISUZU | 4L60E | DEXRON III |
| OLDSMOBILE | 4L60E | DEXRON III |
What transmission fluid does Chevy recommend?
DEXRON®-VI ATF
Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No. 883572)
How many quarts of transmission fluid do I need for a 4L60E?
According to the Amsoil guide the 4L60e has an “initial fill” of 5 qts, and total capacity of 11.2qts. The owners manual doesn’t mention this at all. I don’t see any specification for deep/shallow pan, with/without aux cooler.
What’s the difference between ATF and Dexron transmission fluid?
Dextron is a General Motors approved trans fluid (there are a few versions), and ATF is a generic name for trans fluid. Dextron can and is used in many other makes of vehicles (not just GM), and you need to make certain you are putting the correct fluid in whatever car you own so research whatever applies.
