To determine the type of transmission fluid you need for your Ford vehicle, you have a few options:
1. Refer to your Owner’s Manual: The recommended transmission fluid type for your specific Ford vehicle can usually be found in the Capacities and Specifications section of your Owner’s Manual. If you don’t have a printed copy, you can access digital Owner’s Manuals on Ford’s website.
2. Visit Ford’s Chemicals and Lubricants website: Ford provides a Chemicals and Lubricants website where you can find the recommended transmission fluid type for your vehicle. You can access the website and scroll down to the Transmission Fluids heading to find the appropriate information.
It’s important to note that different Ford vehicles may require different types of transmission fluid. Therefore, it’s best to consult your Owner’s Manual or Ford’s Chemicals and Lubricants website for the most accurate and up-to-date information specific to your vehicle.
Please let me know if there’s anything else I can assist you with!
Contents
- When did Ford switch to Mercon LV?
- What Fords use Type F transmission fluid?
- What vehicles use Mercon transmission fluid?
- Is Dexron and Mercon transmission fluid the same?
- Is Mercon V and LV the same?
- Is Dexron 3 compatible with Mercon?
- When did Ford switch to Mercon V?
- Can you mix Mercon V and LV?
- Can you use Dexron 3 transmission fluid in a Ford?
- Is Mercon V compatible with type F?
When did Ford switch to Mercon LV?
2005 – MERCON LV
In December 2005, Ford released the Mercon “LV” fluid specification (M2C938-A).
What Fords use Type F transmission fluid?
FORD TYPE F AUTOMATIC TRANSMISSION FLUID
Phillips 66® Type F ATF is specifically designed for use in automatic transmissions in passenger cars and light trucks manufactured by Ford Motor Company prior to 1977, and in many 1977-1981 models.
What vehicles use Mercon transmission fluid?
It’s suitable for most Ford, Lincoln and Mercury passenger cars and light-duty trucks (except those specifying Mercon SP, Mercon LV, Mercon ULV or Type F fluids), as well as most pre-2006 GM vehicles and many imports.
Is Dexron and Mercon transmission fluid the same?
In short, the answer is no, and it’s why you want to use an OE approved fluid specific to your car. Dexron fluids are used by GM. Ford and Mazda designed their transmissions for Mercon. Other import brands like Honda (DW-1) and Toyota (ATF Type-T) have their own specific fluid too.
Is Mercon V and LV the same?
It is for all 2008 and newer Ford vehicles. Mercon V is not compatible with Mercon LV. I believe the LV is much thinner, if your car originally required V but the spec has been updated to LV I would stick with mercon V, as the thinner fluid could cause issues in transmissions made for thicker fluids.
Is Dexron 3 compatible with Mercon?
When did Ford switch to Mercon V?
1996 – MERCON V
In 1996, Ford released the Mercon “V” fluid specification (M2C202-B). Ford Technical Service Bulletin (TSB) 06-14-04 indicates that Mercon “V” is to replace the original Mercon fluid. This fluid was first used in the following transmissions: 1997 4R70W 4-speed automatic transmission.
Can you mix Mercon V and LV?
It is recommended that the two should not be mixed. Short answer: NO!!! Long answer: The LV stands for “low viscosity.” It is a fully synthetic ATF. It is not compatible with earlier Mercon fluids, so it should neither be mixed with Mercon or Mercon V used to replace those fluids.
Can you use Dexron 3 transmission fluid in a Ford?
LUBRIPLATE Dexron III/Mercon is a premium fluid fully qualified to cover current requirements for both General Motors and Ford.
Is Mercon V compatible with type F?
MERCON® fluids are back serviceable to Ford vehicles produced since 1981. Generally, vehicles produced prior to that model year require a different type of fluid, Ford Type F. The use of Type F fluids in transmissions designed for MERCON®, or vice versa, could result in poor shift quality.
