Refrigerant Type for a 2017 Honda Pilot
The 2017 Honda Pilot uses R-1234yf refrigerant. This type of refrigerant is specified for the 2016 and newer Honda Pilots, and using the older R-134a refrigerant will void the extended warranty on the AC compressor and seals. It is important to ensure that the correct type of refrigerant is used, as the low pressure fitting will accommodate only the R-1234yf coupling. The sticker in the engine bay of the vehicle will indicate if it requires R-134a refrigerant or the newer R1234YF type for a recharge.
It’s worth noting that the use of R-1234yf refrigerant is part of Honda’s efforts to use environmentally friendly refrigerants that do not require hazardous or poisonous byproducts during manufacturing.
Contents
- What kind of refrigerant does a Honda Pilot take?
- What should the high and low side pressures be for R-1234yf?
- Is R-1234yf a replacement for R134a?
- What happens if you put R134a in a 1234yf system?
- What is the difference between R134a and R1234yf?
- What vehicles take R-1234yf refrigerant?
- When did Honda start using 1234yf?
- What is the difference between R134a and R-1234yf?
- What happens if you put R-134a in a 1234yf system?
- What is the difference between R134a and 1234yf?
What kind of refrigerant does a Honda Pilot take?
R-134a | O’Reilly Auto Parts.
What should the high and low side pressures be for R-1234yf?
R-1234yf System Pressure
| Ambient (outside) Temperature °F | Standard Low Side Pressure Range PSI | Standard High Side Pressure Range PSI |
|---|---|---|
| 75 | 38-48 | 149-168 |
| 80 | 43-48 | 173-205 |
| 85 | 49-58 | 220-243 |
| 90 | 49-58 | 243-261 |
Is R-1234yf a replacement for R134a?
R1234yf and R744 (carbon dioxide) are two refrigerants that have been adopted by some global vehicle manufacturers as alternatives to R134a. These refrigerants are not regulated under the Ozone Protection and Synthetic Greenhouse Gas Management legislation unless they are in a blend containing a HFC.
What happens if you put R134a in a 1234yf system?
The mixing of R-134a with R-1234yf will change refrigerant pressure and may result in evaporator freeze-up on pressure control systems, reducing system airflow.
What is the difference between R134a and R1234yf?
The results of this study have shown that the cooling capacity of R1234yf AAC system is significantly lower (between 5 to 25 %) than R134a system. In the experiment, the power of the compressor is slightly lower (up to 11 %) for refrigerant R1234yf compared to R134a inside the AAC system.
What vehicles take R-1234yf refrigerant?
Current list of OEMs that use R-1234yf refrigerant
- BMW i3 Electric.
- Cadillac XTS.
- Chevrolet Malibu, Spark EV, Trax.
- Chrysler 200C, 200S, 300, 300C.
- Citroën C4, Elysëe.
- Dodge Challenger, Charger, Dart, Ram 1500.
- Fiat 500.
- Ford Transit.
When did Honda start using 1234yf?
General Motors began introducing vehicles to the market utilizing this new system in 2013 with full conversion in 2018. Chrysler, Honda, and Subaru models followed in 2017. It is anticipated that by 2025 all vehicles will contain 1234YF.
What is the difference between R134a and R-1234yf?
The results of this study have shown that the cooling capacity of R1234yf AAC system is significantly lower (between 5 to 25 %) than R134a system. In the experiment, the power of the compressor is slightly lower (up to 11 %) for refrigerant R1234yf compared to R134a inside the AAC system.
What happens if you put R-134a in a 1234yf system?
The mixing of R-134a with R-1234yf will change refrigerant pressure and may result in evaporator freeze-up on pressure control systems, reducing system airflow.
What is the difference between R134a and 1234yf?
As previously mentioned, R1234yf has a lower GWP compared to R134a. This means it has a lower potential to contribute to global warming when released into the atmosphere. According to the Environmental Protection Agency, R1234yf is more energy-efficient compared to R134a.
