What kind of oil goes in a Ford f150 transfer case?

Type of Oil for Ford F150 Transfer Case
For the Ford F150 transfer case, the type of oil to use depends on the model year. Here are the recommended oils for different model years:
– 1974-1977 Model Years: Ford lists SAE 50 Engine Oil for use in temperatures above 10F and SAE 30 Engine Oil for use below 10F.
– 1978-1979 Model Years: Ford specifies Ford D8DZ-19C547-A Standard Transmission Lube for all Bronco and F150-F250-F350 transfer cases including the NP203.
– 1992 Model Year: The recommended oil is Dexron III/Mercon ATF (Automatic Transmission Fluid).
– 2004 Model Year: The Ford manual recommends Motorcraft XL-12, which can be had for $15.00/quart at the dealer.
It’s important to note that the type of oil used depends on the specific model year, so it’s best to refer to the manufacturer’s recommendations for the exact type of oil to use in the transfer case of a specific Ford F150 model year.

Can you put ATF fluid in a transfer case?

You need to clean it with oil flush as well. No need to do that, just drain and refill with ATF. ATF is used with chain-driven transfer cases, gear lube is used with gear-driven transfer cases. And don’t feel rushed to do it, gear lube isn’t going to wreck your TJ’s chain driven transfer case.

Is transfer case oil the same as transmission oil?

Both fluids serve as cooling lubricants for their respective systems. However, the two lubricants are different. While some transfer cases use automatic transmission fluid instead of dedicated transfer case fluid, the two are generally not interchangeable.

What kind of oil does a 2016 f150 transfer case take?

BLAU Ford F-150 Transfer Case Differential Fluid Change Kit includes the recommended and correct amount of synthetic Mercon LV transfer case fluid, 80W-90 front differential gear oil, and 75W-85 rear differential gear oil. Gear oil kit fits the 2015-2016 Ford F-150 models.

What kind of transfer case fluid does a 2017 Ford f150 take?

Default Qty 2 – 1-liter bottles of fully synthetic Eurol ATF 6700 Mercon LV. High-performance replacement meets or exceeds the original recommended Ford F-150 transfer case fluid specs and part numbers XT-10-QLVC, WSS-M2C938-A, Mercon LV. (Transfer case fluid capacity 1.4 liters or 1.5 quarts).

What fluid goes in Ford F 150 transfer case?

Until mid-2018, Ford specified synthetic base Motorcraft XL-12 Transfer Case Fluid for use in chain drive transfer cases that originally used Dexron II or Mercon, however, since that time Ford has superseded XL-12 with Mercon LV.

Do you put gear oil or ATF in the transfer case?

Pro Tip: Most transfer cases are filled with an automatic transmission fluid, which is usually red. Others use a thicker gear oil, while some use a specialized fluid specifically made just for that particular transfer case.

What is the alternative to Ford transfer case fluid?

Mercon LV
Ford has replaced it with Mercon LV. *XL-12 Transfer Case Fluid has been discontinued by Motorcraft® and replaced by Mercon LV.

Is transmission and transfer case fluid the same?

Both fluids serve as cooling lubricants for their respective systems. However, the two lubricants are different. While some transfer cases use automatic transmission fluid instead of dedicated transfer case fluid, the two are generally not interchangeable.

What are the symptoms of low transfer case fluid?

Difficulty changing gears – Low or dirty transfer case fluid can affect your transmission’s ability to shift gears. It can also result in your car unexpectedly falling out of four-wheel drive. Loud noises while driving – As the transfer case fluid loses its lubricating properties, friction will occur inside.

What kind of oil do you use in a transfer case?

Transfer cases may be filled with gear oil, automatic transmission fluid (ATF), or specialty lubricants. It is important to regularly inspect the transfer case for any damage, leaks, or other concerns.