The type of oil that a Subaru Outback uses depends on the engine type.
– For 4-cylinder engines, the recommended oil is OW-20 synthetic motor oil.
– For 6-cylinder engines, the recommended oil is 5W-30 synthetic motor oil.
It’s important to use the correct type of oil for your specific engine to ensure optimal performance and longevity.
Contents
- Can I use 5W-30 instead of 0W-20?
- Can you use 5W-30 instead of 0W-20?
- Do Subarus need special oil?
- Can I put 5W-30 instead of 0W20 Subaru Outback?
- Why does Subaru use 0W 20 oil?
- Does Subaru Outback require synthetic oil?
- What oil does Subaru use from the factory?
- Why does Subaru use 0W-20 oil?
- What is the best oil to use in a Subaru?
- Does Subaru use synthetic oil from factory?
Can I use 5W-30 instead of 0W-20?
Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine. Thus, always refer to the manufacturer’s recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.
Can you use 5W-30 instead of 0W-20?
Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine. Thus, always refer to the manufacturer’s recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.
Do Subarus need special oil?
Naturally aspirated engines in the newest Forester, Impreza, Legacy, Outback, and BRZ models as well as turbocharged models require Subaru Synthetic Motor Oil (or its equivalent).
Can I put 5W-30 instead of 0W20 Subaru Outback?
Like the Crosstrek, the oil for the Subaru Outback needs to be an API classification SN or ILSAC GF-5. Also like the Crosstrek, the Outback engine should be filled with 0W-20 synthetic oil. If synthetic oil isn’t available, you can use either 5W-30 or 5W-40 conventional oil.
Why does Subaru use 0W 20 oil?
What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity. As shown below, the 5W-30 is specially formulated for turbos that run at hotter temperatures. The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.
Does Subaru Outback require synthetic oil?
4-cylinder Subaru Outback models from 2002 to 2012 require a conventional oil blend, but any models after 2012 require synthetic oil. The same applies to 6-cylinder models, but models from 2002 to 2019 can take conventional, whereas models after 2019 and onward demand synthetic oil.
What oil does Subaru use from the factory?
Synthetic 0W-20 is uniquely formulated to handle the low-friction design of Subaru non-turbocharged engines. Synthetic 5W-30 motor oil is required for 2011 and newer turbo-charged engines, and is recommended for prior year models.
Why does Subaru use 0W-20 oil?
What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity. As shown below, the 5W-30 is specially formulated for turbos that run at hotter temperatures. The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.
What is the best oil to use in a Subaru?
For engines that aren’t turbo-charged, 0W-20 synthetic oil is your best Subaru Outback oil type. For older Subaru Outback models, the engine will thrive with a higher viscosity, so if your Outback has seen some miles and years, you can choose 5W-30 synthetic oil.
Does Subaru use synthetic oil from factory?
Starting in 2011 when Subaru changed from Rubber timing belts to timing chains in the 4 cylinder motors, the factory switched to full synthetic motor oils, 0w/20. The chain driven 6 cylinder motor, still uses 5/30 syntec blend.
