AHG Auto Service » Make » Dodge » What kind of oil does Dodge Challenger use?

What kind of oil does Dodge Challenger use?

Dodge Challenger Engine Oil
The type of oil used in a Dodge Challenger depends on the engine size and trim level. Here are the oil recommendations for different models:
– 3.6L engine (GT, SXT, SXT Plus): SAE 5W-20 or 0W-20 oil.
– 5.7L engine (R/T, T/A): SAE 5W-20 oil.
– 6.2L and 6.4L engines (SRT Demon, SRT Hellcat, R/T 392, SRT 392, T/A 392): SAE 0W-40 oil.
It’s important to use the correct and recommended oil for your specific engine to ensure optimal performance and longevity.
Please note that these recommendations are based on the information available up until my knowledge cutoff date of April 02, 2024. For the most up-to-date information, it is always best to consult the owner’s manual or contact a certified Dodge dealership.
I hope this helps! Let me know if you have any other questions.

What oil does Dodge recommend?

Pennzoil synthetic oil does NOT void the warranty of your Chrysler, Jeep, Dodge, or Ram and in fact Pennzoil synthetic is the recommended oil in all their vehicles.

Does Dodge use Pennzoil?

That’s why Ram trusts all of its gasoline-engine models come factory filled with Pennzoil® quality motor oil. Pennzoil® maximizes the performance of Ram trucks – no matter how big the job gets.

What oil is best for Hemi V8?

If you have a RAM 1500 with a 5.7L HEMI, you should use an SAE 5W-20 synthetic blend motor oil. Typically, RAM 1500 trucks take six quarts during an oil change. However, you should fill the HEMI with seven because of the engine’s size difference.

What oil does Dodge use from factory?

Dodge and Pennzoil®
Pennzoil and Dodge have a relationship rooted in passion and trust. Dodge has a fleet of vehicles that clearly demonstrate its drive for providing the highest quality drive possible. From the Dart to the Durango, a Pennzoil formulation comes factory filled.

What is the best oil for a Hemi engine?

SAE 5W-20 synthetic blend
If you have a RAM 1500 with a 5.7L HEMI, you should use an SAE 5W-20 synthetic blend motor oil. Typically, RAM 1500 trucks take six quarts during an oil change. However, you should fill the HEMI with seven because of the engine’s size difference.

What type of oil does Dodge Challenger take?

AMSOIL OE 0W-20 100% Synthetic Motor Oil.

Can I use 5W-30 instead of 5W-20?

Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won’t cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it’s best to stick with it.

What kind of oil does my 2018 Dodge Challenger take?

“the challengers with a 3.6 liter engine, gt, sxt and sxt plus use 5w-20 or 0w-20 oil. while the r/t and the t/a are 5.7 liter eight cylinder engines, they use the same oil type as the previous three trims, just at a higher capacity.”

What is the best oil for a challenger?

I have a 2020 Dodge Challenger SXT (V6) and it’s recommended that I use 5w20 for my car. A local car guru says that using Pennzoil Platinum 0w20 might be “better” than Pennzoil Platinum 5w20 because it has a higher viscosity Index of 182 vs 167 VI of the 5w20.

What oil does a V6 Challenger use?

Oil Grade: SEO11

Viscosity: All TEMPS….5W-20
Capacity: With filter 5.9 quarts. After refill check oil level.
Torque: Oil Drain Plug…20 ft/lbs
AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment