What kind of oil does Chevy Silverado take?

Oil Type for Chevy Silverado
The type of oil your Chevy Silverado requires depends on the model year, engine type, and the specific viscosity grade needed. Here are some key points to consider:
– Oil Specification and Viscosity Grade: The correct engine oil for your Chevy Silverado depends on the oil specification and viscosity grade required. If your Chevrolet Silverado 1500 requires full synthetic oil, it is highly recommended to use synthetic motor oil that meets the dexos1 specification. Oils approved by the manufacturer are specifically marked with the dexos1 logo.
– Oil Capacity: The oil capacity varies depending on the engine type and model year. For example, a 2020 Silverado 1500 3.0L V6 takes 7 quarts of 0W-20 oil, while a 2020 Silverado 1500 2.7L I4 needs 6 quarts of 5W-30 or 0W-30.
– Frequency of Oil Change: The frequency of oil changes for your Chevy Silverado may vary based on the year and engine type. It could be as frequent as every three months or 3000 miles, or longer intervals such as 7500 miles.
– Synthetic Oil: While the Chevy Silverado does not require synthetic oil, it is important to use engine oil that meets the requirements of SAE 0W-20 for certain engine types, and SAE 5W-30 for others. Most oils that meet these viscosity requirements are synthetic.
It’s essential to consult your Chevy Silverado’s owner’s manual for the specific oil type, viscosity grade, and capacity requirements based on the model year and engine type.
If you have any further questions or need additional information, feel free to ask!

What kind of oil does a 2015 Chevy Silverado take?

STP Standard Full Synthetic Engine Oil 0W-20 1 Quart
0W-20.

What kind of oil does a 2016 Chevy 5.3 take?

0W-20
Oil Grade: SEOC3

Viscosity:	All TEMPS….0W-20
Capacity:	With filter 8 quarts. After refill check oil level.
Torque:	Oil Drain Plug…18 ft/lbs

What kind of oil does a 2016 Chevy Silverado 1500 take?

Notes: OE Recommendation, Full synthetic. 0W-20.

Can I use 5W 30 instead of 0W-20?

Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine. Thus, always refer to the manufacturer’s recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.

What kind of oil does a 2013 Silverado 5.3 take?

Notes: OE Recommendation, Full synthetic. 5W-30.

Can I use 5W-30 instead of 0w20 Silverado?

No car “requires” 0W-20. It’s a recommendation, not a requirement. 5w30 will be thicker (more viscous). It will offer better projection to bearings and some other wear surfaces at the expense of slightly worse cooling of some other parts and increase oil pressure delay at extremely cold temperatures.

Can I put 10w30 instead of 5w30?

Yes. 5w30 and 10w30 are both 30 weight oils and the exact same thickness in your engine when it is at operating temperature. The 5w30 is better because it thickens less when cool or cold. 80% of wear occurs at start up.

Does a 2015 Chevy Silverado use synthetic oil?

General Motors, the manufacturer of Chevrolet vehicles, recommends its ACDelco full synthetic brand of oil, called dexos1, for your Chevy Silverado 1500 oil type. The dexos1 oil meets Chevy’s strict requirements for keeping your engine in top condition for as long as you own your pickup truck.

What oil does a Chevy 5.3 take?

If your 2024 Silverado is powered by a 5.3-liter V8 engine, it’s important to use SAE 0W-20 viscosity grade motor oil.

Can I use 5W-30 instead of 0W20 Silverado?

No car “requires” 0W-20. It’s a recommendation, not a requirement. 5w30 will be thicker (more viscous). It will offer better projection to bearings and some other wear surfaces at the expense of slightly worse cooling of some other parts and increase oil pressure delay at extremely cold temperatures.