The Subaru Ascent uses 0W-20 full-synthetic oil as the recommended oil type [[3]] . Synthetic oil provides maximum protection from corrosion and improved gas mileage. It is important to use a high-quality, Subaru-approved oil and oil filter when performing an oil change on the Subaru Ascent. The engine of the Subaru Ascent requires 4.5 quarts of 0W-20 oil with a filter. The recommended oil change interval for the Subaru Ascent is every 7,000 miles or every six months, whichever comes first.
Contents
- Why does Subaru use 0W-20 oil?
- Why does Subaru use 0W 20 oil?
- Do Subarus need special oil?
- What oil is recommended for Subaru Ascent?
- What is the recommended engine oil for Subaru?
- Can I use 5W-30 instead of 0W-20?
- Do Subarus require full synthetic oil?
- Does Subaru use synthetic oil from factory?
- What oil does Subaru use from the factory?
- Which is better 0w-30 or 5W 30?
Why does Subaru use 0W-20 oil?
What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity. As shown below, the 5W-30 is specially formulated for turbos that run at hotter temperatures. The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.
Why does Subaru use 0W 20 oil?
What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity. As shown below, the 5W-30 is specially formulated for turbos that run at hotter temperatures. The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.
Do Subarus need special oil?
Most Subaru models with turbocharged engines use Subaru Synthetic 5W-30 Motor Oil.
What oil is recommended for Subaru Ascent?
0W-20 full-synthetic oil
So, what type of oil does the Subaru Ascent take? The recommended Subaru Ascent oil type is 0W-20 full-synthetic oil, which offers maximum protection from corrosion and improved gas mileage on Town ‘n’ Country roads.
What is the recommended engine oil for Subaru?
Synthetic oil-specifically 0W-20-is highly recommended for optimal engine performance and protection. If synthetic oil isn’t available at the time of an oil change, 5W-30 conventional oil may be used instead. However, it should be replaced with synthetic oil at the next change.
Can I use 5W-30 instead of 0W-20?
Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine. Thus, always refer to the manufacturer’s recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.
Do Subarus require full synthetic oil?
If your Subaru is a 2011 or newer Forester, a 2012 or newer Impreza, or a 2013 or newer Outback, Legacy, Crosstrek, or BRZ, or Ascent – it is REQUIRED to use synthetic oil.
Does Subaru use synthetic oil from factory?
Starting in 2011 when Subaru changed from Rubber timing belts to timing chains in the 4 cylinder motors, the factory switched to full synthetic motor oils, 0w/20. The chain driven 6 cylinder motor, still uses 5/30 syntec blend.
What oil does Subaru use from the factory?
Synthetic 0W-20 is uniquely formulated to handle the low-friction design of Subaru non-turbocharged engines. Synthetic 5W-30 motor oil is required for 2011 and newer turbo-charged engines, and is recommended for prior year models.
Which is better 0w-30 or 5W 30?
5w30 debate for which oil is more fuel economical. According to research, the 0w30 is better by just a small margin. The 0w30 engine oil is not as heavy and it has a quick flow. It also prevents excess friction, making the engine run smoothly.
