What kind of oil does a Ford FG Falcon take?

Ford FG Falcon Engine Oil Recommendation
The Ford FG Falcon typically takes around 6 to 6.5 liters of engine oil during an oil change. It’s important to use the recommended oil to ensure optimal performance and longevity of the engine. Ford recommends using Motorcraft* motor oil for your Ford vehicle, as it helps keep the engine clean, reduces wear, and maximizes performance . The recommended engine oil specifications can be found in the owner’s manual under Capacities and Specifications or on Ford’s Chemicals and Lubricants website.
When choosing engine oil for the Ford FG Falcon, it’s advisable to use a good mid or high SAPS synthetic oil. While the manual does not specify the type of engine oil, it is recommended to use a thicker oil for older cars, such as 10W-40. Additionally, it’s important to note that lubricants are classified by the American Petroleum Institute (API) based on their performance level, and the best type of engine oil to use is the synthetic one.
In summary, for the Ford FG Falcon, it is recommended to use Motorcraft* motor oil and to refer to the owner’s manual or Ford’s Chemicals and Lubricants website for the specific engine oil specifications and capacities.

What oil does FG Falcon take?

Most oil manufacturers familiar with this make and model recommend either a full or semi-synthetic oil with a viscosity of 5W30 or 10W30.

What is the best oil for a Ford engine?

Motorcraft®
Ford recommends using Motorcraft®* motor oil for your Ford vehicle.

What kind of oil does a 2006 Ford Falcon take?

1 x Penrite Premium Mineral SAE 10W-30 Engine Oil 5LTR. FORD BF Falcon MkII RTV Ute, 4.0L 6 Cyl. N/Asp Eng. (2006-2008)Service Refill Capacity: 6.6 Litres.

What kind of oil does a 2004 Ford Falcon take?

I have a 2004 Ford Falcon 4.0l 6cyl petrol cab chassis and have just had a complete engine rebuild, do you do a running in oil to suite my motor. It is recommended by ford to use 10W-30 engine oil.

What does FG stand for Ford Falcon?

The BF continued until 2008, when the FG series was released. Ford discontinued the Fairmont name, replacing it with the G Series line which included the G6 and G6E models. The FG moniker stands as a tribute to the Fairmont Ghia.

Can I use 5w30 instead of 5w20 in my Ford?

In 2011, Ford started recommending 5w30 for the turbocharged 3.5 Ecoboost engines, but they haven’t changed the recommendation for the non-turbo duratec. You can run both 5w20 or 5w30 safely on these engines (turbocharged and non-turbo). Both oils will work great.

Can I use 5W30 instead of 5w20 in my Ford?

In 2011, Ford started recommending 5w30 for the turbocharged 3.5 Ecoboost engines, but they haven’t changed the recommendation for the non-turbo duratec. You can run both 5w20 or 5w30 safely on these engines (turbocharged and non-turbo). Both oils will work great.

What kind of oil does a 2007 Ford Falcon take?

I have Ford falcon futura MKii 2007 with 170.000km and I want to change engine oil please tell me what oil and what. Hi there, you can use anything from 5W-30 to 10W-40. Based on your mileage I would recommend a good quality semi synthetic oil like Castrol Magnetec 10W-40.

How much oil does FG Falcon take?

around 5.7 to 6.6 litres
A Ford Falcon usually requires around 5.7 to 6.6 litres of oil, but this depends on the make and model of your car. It deserves the right oil dose—not too much and not too little—and here at mycar we know just what your Ford Falcon needs.

How much oil does a FG Falcon take?

around 5.7 to 6.6 litres
A Ford Falcon usually requires around 5.7 to 6.6 litres of oil, but this depends on the make and model of your car. It deserves the right oil dose—not too much and not too little—and here at mycar we know just what your Ford Falcon needs.