The type of oil that a Dodge transfer case takes can vary depending on the specific model and year of the vehicle. However, there are some general recommendations. According to vintage Dodge Shop Manuals, the following weight recommendations apply:
– Multi-Purpose Gear Lubricant:
– Above 90F (32C): SAE 140
– As low as -10F (-23C): SAE 90
– Below -10F (-23C): SAE 80
– Engine Oil:
– Above 32F (0C): SAE 50
– Below 32F (0C): SAE 30
For the NP200, NP201, and NP205 Gear Drive Transfer Cases, Dodge lists single viscosity multi-purpose gear lubricants as the first choice and single viscosity motor oils as an option.
It’s important to note that lubricant specifications and service requirements may have changed over the years, so it’s always a good idea to consult the specific vehicle’s manual or contact a Dodge dealership for the most accurate and up-to-date information.
Please keep in mind that this information is based on search results and may not be exhaustive or applicable to all Dodge transfer cases. It’s always best to consult the vehicle’s manual or a trusted professional for specific recommendations.
Contents
- How much fluid does a Dodge Ram 1500 transfer case hold?
- Does the transfer case and transmission share the same oil?
- How many quarts of fluid do I need for a transfer case?
- Can I use transmission fluid for transfer case fluid?
- Can I put transmission fluid in transfer case?
- How much gear oil do you put in a transfer case?
- What kind of oil do you put in a transfer case?
- Can I use motor oil in my transfer case?
- What kind of fluid goes in a Dodge transfer case?
- Does a transfer case take gear oil or transmission fluid?
How much fluid does a Dodge Ram 1500 transfer case hold?
2011 – 2018 Ram 1500 transfer case fluid kill capacity is 1.4 liters (1.47 quarts). 2019 – 2024 Ram 1500 Classic transfer case fluid kill capacity is 1.4 liters (1.47 quarts). 2019 – 2024 Ram 1500 New 5th Gen transfer case fluid fill capacity is 1.3 liters (1.8 quarts) for BorgWarner 48-11 or 48-12 transfer case.
Most transfer cases are filled with an automatic transmission fluid, which is usually red in colour. Others use a thicker gear oil, and some use a specialized fluid that is specifically made just for that transfer case.
How many quarts of fluid do I need for a transfer case?
Transfer Case Fluid Capacity and Specification (If Equipped)
| Variant | Quantity |
|---|---|
| All. | 1.9 qt (1.8 L) |
Can I use transmission fluid for transfer case fluid?
though the fluid is the same, they are separate reservoirs. I just changed my transfer case with some royal purple when doing my cv shafts. The transmission and front differential share the same fluid (ATF). The transfer case (uses Gear Oil) is a separate unit.
Can I put transmission fluid in transfer case?
ATF is used with chain-driven transfer cases, gear lube is used with gear-driven transfer cases. And don’t feel rushed to do it, gear lube isn’t going to wreck your TJ’s chain driven transfer case.
How much gear oil do you put in a transfer case?
The gear oil to drain more. Quickly. Once the fill plug is removed and the oil catch pan in place remove.
What kind of oil do you put in a transfer case?
automatic transmission fluid (ATF)
Transfer cases may be filled with gear oil, automatic transmission fluid (ATF), or specialty lubricants. It is important to regularly inspect the transfer case for any damage, leaks, or other concerns.
Can I use motor oil in my transfer case?
You MUST use ATF. Reason being, there isn’t a lot of 10 weight motor oil around. Running motor oil, or gear oil, will starve it of lubrication. The pump just won’t pump enough heavy oil.
What kind of fluid goes in a Dodge transfer case?
The fluid in your transfer case is MobilFluid LT.
Does a transfer case take gear oil or transmission fluid?
These can help you make more informed decisions about your car. Pro Tip: Most transfer cases are filled with an automatic transmission fluid, which is usually red.
