The type of oil that a Dodge Ram van takes depends on the specific engine and model year. Here are some general guidelines based on the search results:
– For a Dodge Ram 1500 with a 3.6L Pentastar V6 engine, it is recommended to use SAE 0W-20 synthetic blend oil.
– For a Dodge Ram 1500 with a 5.7L HEMI engine, it is recommended to use synthetic oil blend with a weight of SAE 5W-20.
– For a Dodge Ram 1500 with a 3.0L EcoDiesel V6 engine, it requires 5W-40 full synthetic engine oil.
– The oil capacity for a Dodge Ram 1500 with a 5.7L HEMI engine is 7 quarts.
It’s important to consult the owner’s manual or contact a certified service department for the specific oil recommendations for your Dodge Ram van, as the oil type and capacity may vary depending on the engine and model year.
Contents
- What kind of oil does a Dodge Promaster 1500 take?
- Can I use 5W-30 instead of 5W-20?
- Does RAM 1500 need full synthetic oil?
- What kind of oil does a Dodge Ram Van 1500 take?
- How much oil does a Dodge Ram Van 1500 take?
- What oil does Dodge recommend?
- How much oil does a 3.6 L ProMaster take?
- How many quarts of oil in Dodge Ram Promaster?
- Is there a big difference between 5W-20 and 5W-30 motor oil?
- Does Ram recommend synthetic oil?
What kind of oil does a Dodge Promaster 1500 take?
Oil Grade: SEO11
| Viscosity: | All TEMPS….5W-20 |
|---|---|
| Capacity: | With filter 5.9 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…20 ft/lbs |
Can I use 5W-30 instead of 5W-20?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won’t cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it’s best to stick with it.
Does RAM 1500 need full synthetic oil?
The RAM 1500 with the 5.7L V8 HEMI engine requires SAE 5W-20 full synthetic oil.
What kind of oil does a Dodge Ram Van 1500 take?
For those driving a RAM 1500 with a 3.6L V6 gasoline engine, experts at Mopar suggest using SAE 0W-20 full synthetic RAM 1500 oil. On the other hand, if your RAM 1500 is equipped with a robust 5.7L V8 HEMI gasoline engine, SAE 5W-20 full synthetic oil is the ideal choice.
How much oil does a Dodge Ram Van 1500 take?
5 quarts
Oil Grade: API*
| Viscosity: | 10W-30 (Above -18) – SAE 10W-30 is preferred. 5W-30 (Below 0) |
|---|---|
| Capacity: | 5 quarts (with filter). After refill check oil level. |
| Torque: | 25 ft/lbs (Oil Drain Plug) |
What oil does Dodge recommend?
Pennzoil synthetic oil does NOT void the warranty of your Chrysler, Jeep, Dodge, or Ram and in fact Pennzoil synthetic is the recommended oil in all their vehicles.
How much oil does a 3.6 L ProMaster take?
5.9 quarts (with filter).
How many quarts of oil in Dodge Ram Promaster?
5.9 quarts
5.9 quarts (with filter).
Is there a big difference between 5W-20 and 5W-30 motor oil?
The 5W-20 will remain a little thinner at operating temperature, as indicated by its lower “20” number, while 5W-30 will provide a slightly thicker lubricating film.
Does Ram recommend synthetic oil?
The 3.6L Pentastar® V6 engine takes a synthetic blend oil. It’s preferred that you use one with an oil weight of SAE 0W-20. If you’ve got the 5.7L HEMI® engine, however, you’ll want to use synthetic oil that’s got a weight of SAE 5W-20.
