The Dodge 3.6 engine typically requires 5 quarts (or 4.7 liters) of oil for an oil change. The recommended oil viscosity for the Dodge 3.6 engine is 5W-20 . It is important to use the recommended oil viscosity to ensure proper engine performance and avoid any potential issues.
Contents
- What is the best oil for Chrysler 3.6 V6?
- How much oil does a 3.6 L V6 RAM take?
- How much oil does a Dodge 3.6 V6 take?
- What kind of oil does a 3.6 take?
- How much oil does a 3.6 liter Dodge engine hold?
- What oil does Dodge recommend?
- What kind of oil does a Dodge Challenger 3.6 V6 take?
- How many quarts of oil does a 3.6 Dodge Ram take?
- What oil does a Ram 3.6 V6 take?
- How much oil does a 3.6 Dodge Ram take?
What is the best oil for Chrysler 3.6 V6?
Your vehicle manual calls for a 5W20 oil, w/ the API Starburst, and that meets/exceds Chrysler MS6395. If you can not find a 5W20 that meets/exceeds MS 6395 the manual says you can use a 5W30 that meets/exceeds Fiat 9.55535-S1 or Fiat 9.55535-S3.
How much oil does a 3.6 L V6 RAM take?
Oil Grade: SEO11
Viscosity: | 5W-20 (All TEMPS) – Mopar SAE 5W-30 engine oil approved to the manufacturer material standard MS-6395 may be used when SAE 5W-20 engine meeting MS-6395 is not available. |
---|---|
Capacity: | 5.9 quarts (with filter). After refill check oil level. |
Torque: | 20 ft/lbs (Oil Drain Plug) |
How much oil does a Dodge 3.6 V6 take?
Capacity: 5.9 quarts (with filter).
What kind of oil does a 3.6 take?
WXman said: Bottom line is both oils will work, but 5w30 synthetic will net the best odds of a long engine life, which is why the 3.6L originally was spec’d with it.
How much oil does a 3.6 liter Dodge engine hold?
Oil Grade: SEO11
Viscosity: | All TEMPS….5W-20 |
---|---|
Capacity: | With filter 5.6 litres. After refill check oil level. |
Torque: | Oil Drain Plug…20 ft/lbs |
What oil does Dodge recommend?
Pennzoil synthetic oil does NOT void the warranty of your Chrysler, Jeep, Dodge, or Ram and in fact Pennzoil synthetic is the recommended oil in all their vehicles.
What kind of oil does a Dodge Challenger 3.6 V6 take?
5W-20 – Mopar SAE 5W-30 engine oil approved to the manufacturer material standard MS-6395 may be used when SAE 5W-20 engine meeting MS-6395 is not available.
How many quarts of oil does a 3.6 Dodge Ram take?
six quarts
The 3.6L V6 Pentastar takes oil in two different places. The engine, camshafts, and valvetrain require six quarts of SAE 0W-20.
What oil does a Ram 3.6 V6 take?
synthetic blend oil
The 3.6L Pentastar® V6 engine should be lubricated with a synthetic blend oil, preferably one with an oil weight of SAE 0W-20. However, the 5.7L HEMI® engine should be lubricated with a synthetic oil blend with a weight of SAE 5W-20.
How much oil does a 3.6 Dodge Ram take?
5.9 quarts
Oil Grade: SEO11
Viscosity: | All TEMPS….5W-20 – Mopar SAE 5W-30 engine oil approved to the manufacturer material standard MS-6395 may be used when SAE 5W-20 engine meeting MS-6395 is not available. |
---|---|
Capacity: | With filter 5.9 quarts. After refill check oil level. |
Torque: | Oil Drain Plug…20 ft/lbs |