AHG Auto Service » Make » Chevrolet » What kind of oil does a Chevy Cobalt take?

What kind of oil does a Chevy Cobalt take?

Oil Type for Chevy Cobalt
The type of oil your Chevrolet Cobalt takes depends on the year and trim level of your vehicle. Typically, Chevy installs A5W-30 synthetic lubricant in its vehicles from the factory. The 2.2L engine will typically require a little over 5 quarts, including the filter. It is recommended to change the oil in your Cobalt at 7,500 miles, or every 12 months, assuming you’re using the recommended synthetic oil. For a conventional oil, it is recommended to change it every 3,000 miles or at 3 months.
It is also recommended by Chevy to use conventional 5w-30 motor oil in your 2010 Chevy Cobalt, with an oil capacity of 5.0 quarts with a new filter. It is recommended to change your oil every 3,000-5,000 miles or 1 year, whichever comes first.
Conclusion
The recommended oil type for a Chevy Cobalt is A5W-30 synthetic lubricant or conventional 5w-30 motor oil, depending on the year and trim level of the vehicle. Always refer to the specific recommendations for your vehicle to ensure the correct oil type and maintenance schedule.

What kind of oil does a 2008 Chevy Cobalt LS take?

AMSOIL OE 5W-30 100% Synthetic Motor Oil.

What is the best oil for a 2005 Chevy Cobalt?

Mobil 1 Full Synthetic Engine Oil 5W-30 1 Quart
5W-30.

What is the best oil for 2009 Chevy?

Use only an oil that meets GM Standard GM6094M. Temperatures above -20°F (-29°C), SAE 5W-30 is best for the vehicle. These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils such as SAE 10W-40, SAE 20W-50 or any other viscosity grade oil not recommended.

What oil does a Chevy Cobalt 2007 take?

SAE 5W-30
5W-30 – SAE 5W-30 is preferred. Capacity: With filter 5.1 quarts. After refill check oil level.

Does a 2008 Chevy Cobalt take synthetic oil?

Notes: Full synthetic. 5W-30. 5 quart.

Can I use synthetic oil in my 2010 Chevy Cobalt?

AMSOIL synthetic lubricants are the solution for drivers who want the most from their 2010 Chevrolet COBALT.

Does a 2006 Chevy Cobalt take synthetic oil?

Notes: Full synthetic. 5W-30.

What oil do you put in an LS engine?

These engines leave Indmar filled with 5W30 Mobil 1 and that is the oil that should be used in these engines at the normal 50 hour oil change intervals. The oil capacity of these engines is approximately 6 quarts (5.7 Liters).

What kind of oil does a 2009 Chevy Cobalt take?

Oil Grade: SEO23

Viscosity: All TEMPS….5W-30
Capacity: With filter 5 quarts. After refill check oil level.
Torque: Oil Drain Plug…18 ft/lbs

What motor oil does Chevy recommend?

For a gasoline engine, we recommend SAE 5W-30 Dexos1 full synthetic oil.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment