Based on the search results, the Chevy 6.2 engine requires SAE 0W-20 viscosity grade engine oil. It is important to use the recommended oil type for optimal performance and longevity of the engine.
Contents
- How much oil does a 6.2L V8 take?
- Can I use 5W-30 instead of 0W-20?
- What happens if I use 5W-30 instead of 5W-20?
- What oil is best for 6.2 L LS?
- What oil is recommended for Chevy 6.2 gas?
- Can I use 5w30 instead of 0W20 Silverado?
- How many quarts of oil does a 6.2 liter Chevy engine take?
- How much oil does a 6.2 L V8 take?
- What oil does a 6.2 GMC take?
- Can I run 87 octane in my 6.2 Silverado?
How much oil does a 6.2L V8 take?
Capacities and Specifications – 6.2L V8
Item | Capacity |
---|---|
Engine oil (with oil filter) | 7.0 qt (6.6 L) |
Engine coolant | 21.3 qt (20.2 L) |
Brake fluid | Between MIN and MAX on brake fluid reservoir |
Front axle | 3.0 qt (2.8 L) |
Can I use 5W-30 instead of 0W-20?
Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine. Thus, always refer to the manufacturer’s recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.
What happens if I use 5W-30 instead of 5W-20?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won’t cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it’s best to stick with it.
What oil is best for 6.2 L LS?
6.2-Liter V8 Engine
It will require SAE 0W-20 viscosity grade engine oil.
What oil is recommended for Chevy 6.2 gas?
The best oil for a Chevy Silverado 1500 depends on the age and engine in your truck. In general, the top Chevy Silverado 1500 oil type is SAE 0W-20 full synthetic motor oil from ACDelco’s dexos1 standard for the 5.3L and 6.2L engines.
Can I use 5w30 instead of 0W20 Silverado?
The small difference in viscosity would not be a problem. I used 5w-30 full synthetic insted of the recomended 0w-20 in my 2015 6.2 silverado will something happen to the engine? It won’t immediately destroy anything, and in the summer it won’t make a big difference.
How many quarts of oil does a 6.2 liter Chevy engine take?
Capacity: With filter 8 quarts. After refill check oil level.
How much oil does a 6.2 L V8 take?
Capacities and Specifications – 6.2L V8
Item | Capacity |
---|---|
Engine oil (with oil filter) | 7.0 qt (6.6 L) |
Engine coolant | 21.3 qt (20.2 L) |
Brake fluid | Between MIN and MAX on brake fluid reservoir |
Front axle | 3.0 qt (2.8 L) |
What oil does a 6.2 GMC take?
Oil Grade: SEOC3
Viscosity: | All TEMPS….0W-20 |
---|---|
Capacity: | With filter 8 quarts. After refill check oil level. |
Torque: | Oil Drain Plug…18 ft/lbs Replace drain plug seal. |
Notes: | (1) GM Dexos 1 Gen 2 has been discontinued and replaced by GM Dexos 1 Gen 3. |
Can I run 87 octane in my 6.2 Silverado?
Fill the truck with premium gasoline if you drive a Chevrolet Silverado 1500 with a 6.2-liter V-8 engine under the hood. Chevy notes that you can use regular unleaded gasoline if high-octane fuel is unavailable. Still, it may reduce the truck’s performance and drivability.