What kind of oil does a Chevy 5.3 engine take?

Oil Type for Chevy 5.3 Engine
The type of oil required for a Chevy 5.3 engine can vary depending on the specific model and year. Generally, the Chevy/GMC 5.3 engine uses either 6 quarts or 8 quarts of oil, depending on the specific engine variant and vehicle model year. For example, the Chevy Avalanche takes 6 quarts, while some GMC Yukon cars take 8 quarts. The recommended oil viscosity for the 5.3L engine is typically SAE 5W-30 or SAE 0W-20 [[3]].
Oil Capacity for Chevy 5.3 Engine
The oil capacity for the Chevy 5.3 engine can also vary based on the specific model and year. Current generations of Chevy Silverado 5.3L (with L82 and L84 engines) require 8 quarts of oil. However, it’s important to note that the oil capacity can differ for different models and years, so it’s advisable to consult the owner’s manual or perform a specific lookup for the vehicle’s oil capacity based on the year and model.
Recommended Oil Types for Specific Models
For the 2022 Chevrolet Silverado with a 5.3-liter V8 engine, it’s important to use SAE 0W-20 viscosity grade motor oil. Additionally, the 2019 Chevy Silverado uses 6 quarts of SAE 5W-30 oil for the V8 engine, with a recommendation to use synthetic oil whenever an oil change is needed.
In summary, the specific oil type and capacity for a Chevy 5.3 engine can vary based on the model and year, so it’s essential to refer to the owner’s manual or perform a specific lookup for the vehicle’s requirements.

What motor oil does GMC recommend?

Our service technicians highly recommend using ACDelco Dexos1 full synthetic oil for newer and more modern GMC vehicles.

How often should you change the oil in a 5.3 Chevy?

between 7,000-10,000 miles
Chevrolet Recommended Oil Change Intervals
The broad guideline for Chevrolet vehicle oil changes is between 7,000-10,000 miles. That said, certain vehicles will need their oil changed sooner, and this is doubly true for vehicles being driven hard.

What is the best synthetic oil for a Chevy Silverado?

The top Chevy Silverado 1500 oil is ACDelco dexos1 SAE 0W-20 full synthetic motor oil for the 5.3L and 6.2L gasoline engines. For the smaller 2.7L TurboMax high-output engine, you’ll need ACDelco dexos1 SAE 5W-30 full synthetic oil.

What oil does a 5.3 GMC take?

Oil Grade: SEO20

Viscosity:	All TEMPS….0W-20
Capacity:	With filter 8 quarts. After refill check oil level.
Torque:	Oil Drain Plug…18 ft/lbs

How much oil does a 5.3 Vortec use?

Doing some research and it seems that 2014 and later 5.3s use 8.5 quarts of oil.

How many quarts of oil does a 5.3 v8 take?

8 quarts
Capacity: With filter 8 quarts.

What kind of oil does a 2013 Chevy 5.3 take?

5W-30
Notes: OE Recommendation, Full synthetic. 5W-30.

What is the best oil for 5.3 Chevy?

In general, the top Chevy Silverado 1500 oil type is SAE 0W-20 full synthetic motor oil from ACDelco’s dexos1 standard for the 5.3L and 6.2L engines. For the smaller 2.7L TurboMax high-output engine, you’ll need SAE 5W-30 full synthetic oil.

What oil does GMC recommend?

With a gasoline engine, we highly recommend SAE5W-30 Dexos1 full synthetic oil. For protection when you encounter lower temperatures below 20 degrees Fahrenheit, think about 0W-30 oil to make sure it stays fluid in extremely cold temperatures.

Can I put 10w30 instead of 5w30?

Yes. 5w30 and 10w30 are both 30 weight oils and the exact same thickness in your engine when it is at operating temperature. The 5w30 is better because it thickens less when cool or cold. 80% of wear occurs at start up.