The 2016 Subaru Crosstrek uses 0W-20 full synthetic oil. It is recommended to use Subaru-approved engine oil, but if that is not available, you can use oil with the following specifications:
– API (American Petroleum Institute) classification SN with the words “RESOURCE CONSERVING”
– ILSAC (International Lubricant Standardization and Approval Committee) GF-5.
Please note that it is always a good idea to consult your owner’s manual or reach out to a Subaru service center for the most accurate and up-to-date information on oil specifications for your specific vehicle.
Contents
- What oil does 2016 Subaru take?
- Can I put 5w30 instead of 0w20 Subaru?
- Can I use 5W 20 instead of 0W-20?
- Can I use 5W-30 instead of 0W-20?
- What will happen if I use 5w30 instead of 0w20?
- What is the best oil for Subarus?
- What is the best oil to use in a Subaru?
- What type of oil does a 2016 Subaru Crosstrek take?
- Do all Subarus use synthetic oil?
- What kind of oil should I put in my Subaru Crosstrek?
What oil does 2016 Subaru take?
5W-30 synthetic motor oil is required for 2011 and newer turbo-charged Subaru vehicles.
Can I put 5w30 instead of 0w20 Subaru?
Synthetic oil-specifically 0W-20-is highly recommended for optimal engine performance and protection. If synthetic oil isn’t available at the time of an oil change, 5W-30 conventional oil may be used instead. However, it should be replaced with synthetic oil at the next change.
Can I use 5W 20 instead of 0W-20?
Simply put, no. Some engine manufactures will say that 5w20 can be installed but 0w20 is preferred, especially if the engine was manufactured before the most recent change in API standards. But most newer engines were designed with tolerances designed specifically with 0w20 being installed.
Can I use 5W-30 instead of 0W-20?
Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine. Thus, always refer to the manufacturer’s recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.
What will happen if I use 5w30 instead of 0w20?
Fuel Economy and Efficiency
0w20 engine oil typically outperforms 5w30 in terms of fuel efficiency. 0w20 oil offers superior fuel efficiency and performs better in cold weather, while 5w30 provides heightened high-temperature protection. However, the difference in fuel economy is typically marginal.
What is the best oil for Subarus?
Subaru Oil Guide:
| Model | Subaru Oil Required | Capacity |
|---|---|---|
| Subaru Legacy & Outback XT (Turbo) 2020 – 2021 | 0W-20 Synthetic Oil | 4.8 Quarts |
| Subaru WRX 2002 – 2010 | 5W-30 Conventional Oil | 4.4 – 5 Quarts |
| Subaru WRX 2011 – 2020 | 5W-30 Synthetic Oil | 4.4 – 5.4 Quarts |
| Subaru Crosstrek 2013 – 2021 | 0W-20 Synthetic Oil | 4.4 – 5.1 Quarts |
What is the best oil to use in a Subaru?
For engines that aren’t turbo-charged, 0W-20 synthetic oil is your best Subaru Outback oil type. For older Subaru Outback models, the engine will thrive with a higher viscosity, so if your Outback has seen some miles and years, you can choose 5W-30 synthetic oil.
What type of oil does a 2016 Subaru Crosstrek take?
The Subaru Crosstrek oil type for the most recent models is 0W-20 synthetic oil. Using OEM Subaru oil is always the right choice for your Crosstrek, since this auto fluid is designed specifically for Subaru models and provides the performance boost you crave while driving around Pasadena and the surrounding areas.
Do all Subarus use synthetic oil?
If your Subaru is a 2011 or newer Forester, a 2012 or newer Impreza, or a 2013 or newer Outback, Legacy, Crosstrek, or BRZ, or Ascent – it is REQUIRED to use synthetic oil.
What kind of oil should I put in my Subaru Crosstrek?
synthetic oil
Typically, Subaru recommends using synthetic oil with a viscosity rating of 0W-20 for most Crosstrek models. Synthetic oil offers better performance and protection compared to conventional oil, especially in extreme temperatures and demanding driving conditions.
