AHG Auto Service » Make » Dodge » What kind of oil does a 2016 Dodge Challenger take?

What kind of oil does a 2016 Dodge Challenger take?

Oil Type for 2016 Dodge Challenger
The type of oil recommended for the 2016 Dodge Challenger depends on the size of the engine. Here are the specific recommendations based on the engine size:
– 3.6 L V6 and 5.7 L V8 Engines: It is recommended to use 5W-20 Synthetic.
– 6.2 L V8 and 6.4 L V8 Engines: 0W-40 Synthetic should be used.
The capacity for the Challenger also depends on the engine size. The SRT Hellcat has an oil capacity of 6 quarts, while all the HEMI engines can hold 6.9 quarts.
It’s important to note that the oil and the filter should be changed every 7,500 to 10,000 miles. The recommended oil type for all engine models of the 2016 Dodge Challenger is SAE 5W-20.
In summary, for the 2016 Dodge Challenger, the recommended oil type is SAE 5W-20 for all engine models, with specific synthetic oil recommendations for different engine sizes.

What oil does 2016 Dodge Challenger take?

Oil Grade: SEO11

Viscosity: 5W-20 (All TEMPS)
Capacity: 5.9 quarts (with filter). After refill check oil level.
Torque: 20 ft/lbs (Oil Drain Plug)

How much oil does a V6 Challenger take?

6 Qts
Dodge Charger Challenger 3.6L 6 Qts.

What oil does a Dodge Charger 3.6 V6 take?

5W-20
Oil Grade: SEO11

Viscosity: 5W-20 (All TEMPS)
Capacity: 5.9 quarts (with filter). After refill check oil level.
Torque: 20 ft/lbs (Oil Drain Plug)

What kind of oil does a Dodge Charger V6 take?

5W-20
6 liters 5W-20 Dodge Charger engine oil, oil filter, and hardware for 3.6L V6 applications. Advanced RAVENOL USVO fully synthetic oil technology meets or exceeds recommended MS-6395 motor oil quality spec. Fits 2014-2021 Dodge Charger 3.6L V6.

What kind of oil does a Dodge 3.6 take?

6 liters 5W-20 Dodge Challenger engine oil, oil filter, and hardware for 3.6L V6 applications. Advanced RAVENOL USVO fully synthetic oil technology meets or exceeds recommended MS-6395 motor oil quality standards. Fits 2014-2021 Dodge Challenger 3.6L V6.

What kind of oil does a Dodge Challenger take?

5W-20, Pennzoil SAE 5W-20, and Pennzoil gold 5W-20 semi-synthetic oil. Refer to your engine oil filler cap for correct SAE grade.

What oil does a v6 Challenger use?

Oil Grade: SEO11

Viscosity: All TEMPS….5W-20
Capacity: With filter 5.9 quarts. After refill check oil level.
Torque: Oil Drain Plug…20 ft/lbs

What oil is recommended for Dodge V6?

Based on manufacturer recommendations, you’ll achieve the best results using MOPAR DEF fluid. If your RAM 1500 has the 3.6L Pentastar V6, you’ll want to use six quarts of SAE 0W-20 synthetic motor oil in the engine’s main bearings, camshafts, and valvetrain areas.

What oil does Dodge recommend?

Pennzoil synthetic oil does NOT void the warranty of your Chrysler, Jeep, Dodge, or Ram and in fact Pennzoil synthetic is the recommended oil in all their vehicles.

Is 5W-20 oil good?

Recommending lighter-viscosity oil, such as 5W-20, helps protect modern engines with tighter tolerances while promoting improved fuel economy. Some automakers are even recommending 0W-16 to achieve even better fuel-economy gains.

AHG Auto Service

At AHG, we are committed to always providing our Perth customers with the best service and benefits when it comes to their vehicle servicing and repair needs. We have over 30 passenger and commercial vehicle dealerships in WA and can handle all of your car servicing needs no matter the make or model.

Leave a Comment