The 2014 Subaru Impreza takes SAE 5w-30 oil as specified by the factory requirements. The recommended oil volume for the engine is 4.2 quarts or 4 liters when replacing the oil and oil filter for its service interval. It is important to use oil that meets the same classification, viscosity, and grade shown in the Owner’s Manual, and to follow the oil and filter changing intervals shown in the maintenance schedule.
Contents
- Can you run 5w30 instead of 0w20?
- What oil should I put in a Subaru Impreza?
- What is the best oil to use in a Subaru?
- Can I put 5w30 instead of 0w20 Subaru?
- Do Subarus require full synthetic oil?
- What happens if I use 0W-20 instead of 5W-20?
- How much oil does a 2014 Subaru Impreza take?
- Can I put 5w30 in my Subaru Impreza?
- What oil does a Subaru Impreza take 2014?
- What will happen if I use 5w30 instead of 0w20?
Can you run 5w30 instead of 0w20?
Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine. Thus, always refer to the manufacturer’s recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.
What oil should I put in a Subaru Impreza?
Subaru Oil Guide:
| Model | Subaru Oil Required | Capacity |
|---|---|---|
| Subaru Impreza 2002 – 2011 | 5W-30 Conventional Oil | 4.4 Quarts |
| Subaru Impreza 2012 – 2021 | 0W-20 Synthetic Oil | 4.7 – 5.3 Quarts |
| Subaru Legacy & Outback 2002 – 2012 | 5W-30 Conventional Oil | 4.4 Quarts |
| Subaru Legacy & Outback 2013 – 2021 | 0W-20 Synthetic Oil | 4.4 – 5.1 Quarts |
What is the best oil to use in a Subaru?
For engines that aren’t turbo-charged, 0W-20 synthetic oil is your best Subaru Outback oil type. For older Subaru Outback models, the engine will thrive with a higher viscosity, so if your Outback has seen some miles and years, you can choose 5W-30 synthetic oil.
Can I put 5w30 instead of 0w20 Subaru?
What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity. As shown below, the 5W-30 is specially formulated for turbos that run at hotter temperatures. The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.
Do Subarus require full synthetic oil?
If your Subaru is a 2011 or newer Forester, a 2012 or newer Impreza, or a 2013 or newer Outback, Legacy, Crosstrek, or BRZ, or Ascent – it is REQUIRED to use synthetic oil.
What happens if I use 0W-20 instead of 5W-20?
The 0W or 5W refers to the pumpability in cold temperatures. Therefore, a 0W would flow more easily than a 5W and could be an acceptable substitute. Thus, it is suitable to use a SAE 0W-20 as a replacement for SAE 5W-20 application. **Offers same protection as 5W but also provides faster flow and better fuel economy.
How much oil does a 2014 Subaru Impreza take?
Oil Grade: SM
| Viscosity: | All TEMPS….5W-30 |
|---|---|
| Capacity: | With filter 4.5 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…32.5 ft/lbs Install a new washer on the drain bolt. Only use an OE drain plug. |
| Notes: | (1) Synthetic oil is required. |
Can I put 5w30 in my Subaru Impreza?
It is true that in many parts of the world, this VERY SAME engine is spec’d for oil which is not 0w20. Hence, there is no “harm” in switching besides the emissions/efficiency already mentioned.
What oil does a Subaru Impreza take 2014?
2014 Subaru Impreza Synthetic 0w-20 oil qt – SOA427V1310 – Genuine Subaru Part.
What will happen if I use 5w30 instead of 0w20?
Fuel Economy and Efficiency
0w20 engine oil typically outperforms 5w30 in terms of fuel efficiency. 0w20 oil offers superior fuel efficiency and performs better in cold weather, while 5w30 provides heightened high-temperature protection. However, the difference in fuel economy is typically marginal.
