The 2014 Subaru Crosstrek takes 0W-20 synthetic oil . It is recommended to use Subaru-approved engine oil, but if that is not available, you can use oil with the following specifications:
– API (American Petroleum Institute) classification SN with the words “RESOURCE CONSERVING”
– ILSAC (International Lubricant Specification Advisory Committee) GF-5, which is identified with an ILSAC certification mark.
Please note that it is always a good idea to consult the owner’s manual or reach out to a Subaru service center for the most accurate and up-to-date information regarding oil specifications for your specific vehicle model.
Contents
- How much oil does a 2014 Crosstrek 2.5 take?
- Can you put 5W-30 in a Subaru Crosstrek?
- How much oil does a 2014 Crosstrek take?
- What kind of oil does a Subaru Crosstrek take?
- Can I put 5w30 instead of 0w20 Subaru?
- Can you run 5w30 instead of 0w20?
- What is the best engine oil for Subaru XV 2014?
- Does it matter if you use 5w30 instead of 0w20?
- What will happen if I use 5w30 instead of 0w20?
- Can I put 5W-30 instead of 0W-20?
How much oil does a 2014 Crosstrek 2.5 take?
Subaru Oil Guide:
| Model | Subaru Oil Required | Capacity |
|---|---|---|
| Subaru WRX 2011 – 2020 | 5W-30 Synthetic Oil | 4.4 – 5.4 Quarts |
| Subaru Crosstrek 2013 – 2021 | 0W-20 Synthetic Oil | 4.4 – 5.1 Quarts |
| Subaru Crosstrek Hybrid 2014 – 2021 | 0W-20 Synthetic Oil | 4.4 – 5.1 Quarts |
| Subaru Ascent 2019 – 2021 | 0W-20 Synthetic Oil | 4.8 Quarts |
Can you put 5W-30 in a Subaru Crosstrek?
If synthetic oil isn’t available at the time of an oil change, 5W-30 conventional oil may be used instead. However, it should be replaced with synthetic oil at the next change. As for engine oil capacity, the Crosstrek can hold 4.7 quarts of oil.
How much oil does a 2014 Crosstrek take?
Capacity: With filter 5.1 quarts. After refill check oil level.
What kind of oil does a Subaru Crosstrek take?
0W-20 synthetic oil
The Subaru Crosstrek oil type for the most recent models is 0W-20 synthetic oil. Using OEM Subaru oil is always the right choice for your Crosstrek, since this auto fluid is designed specifically for Subaru models and provides the performance boost you crave while driving around Pasadena and the surrounding areas.
Can I put 5w30 instead of 0w20 Subaru?
What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity. As shown below, the 5W-30 is specially formulated for turbos that run at hotter temperatures. The 0W-20 is the perfect weight for he non-turbo engine and is formulated for improved fuel economy.
Can you run 5w30 instead of 0w20?
Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine. Thus, always refer to the manufacturer’s recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.
What is the best engine oil for Subaru XV 2014?
Your Subaru XV will require synthetic oil. Subaru recommends 0W-20 synthetic as the best choice because it improves fuel economy while maximising power. It may be more expensive, but synthetic oil is far better for your engine health, and over the long term will translate into huge savings.
Does it matter if you use 5w30 instead of 0w20?
Fuel Economy and Efficiency
0w20 engine oil typically outperforms 5w30 in terms of fuel efficiency. 0w20 oil offers superior fuel efficiency and performs better in cold weather, while 5w30 provides heightened high-temperature protection.
What will happen if I use 5w30 instead of 0w20?
Fuel Economy and Efficiency
0w20 engine oil typically outperforms 5w30 in terms of fuel efficiency. 0w20 oil offers superior fuel efficiency and performs better in cold weather, while 5w30 provides heightened high-temperature protection. However, the difference in fuel economy is typically marginal.
Can I put 5W-30 instead of 0W-20?
Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine. Thus, always refer to the manufacturer’s recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.
