The 2013 Subaru Legacy takes 0W-20 synthetic oil. The oil capacity for the 2.5L engine is 5.1 quarts. It is recommended to change the oil every 3,000-5,000 miles or 1 year, whichever comes first.
Contents
- What kind of oil does a 2013 Subaru 2.5 take?
- Can I put 5W-30 instead of 0W-20?
- What type of oil does a Subaru Legacy take?
- How much oil does a 2013 Legacy 2.5 take?
- What kind of oil does a Subaru Legacy 2.5 take?
- Does Subaru need full synthetic oil?
- What kind of oil do you put in a 2013 Subaru Legacy?
- How much oil does a 2.5 L Subaru engine take?
- Can I put 5W30 instead of 0w20 Subaru?
- Can I put 5w30 instead of 0w20 Subaru?
What kind of oil does a 2013 Subaru 2.5 take?
Subaru Outback 2002 to 2012: 5W-30 Conventional Oil. Subaru Outback 2013 to 2023: 0W-20 Synthetic Oil.
Can I put 5W-30 instead of 0W-20?
Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine. Thus, always refer to the manufacturer’s recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.
What type of oil does a Subaru Legacy take?
Subaru Oil Guide:
| Model | Subaru Oil Required | Capacity |
|---|---|---|
| Subaru Legacy & Outback 2013 – 2021 | 0W-20 Synthetic Oil | 4.4 – 5.1 Quarts |
| Subaru Legacy Turbo 2005 – 2010 | 5W-30 Conventional Oil | 4.5 Quarts |
| Subaru Legacy Turbo 2011 – 2012 | 5W-30 Synthetic Oil | 4.5 Quarts |
| Subaru Legacy & Outback 6 Cyl. 2002 – 2019 | 5W-30 Conventional Oil | 6 – 6.9 Quarts |
How much oil does a 2013 Legacy 2.5 take?
5.1 quartsOil Grade: SM
| Viscosity: | All TEMPS….0W-20 |
|---|---|
| Capacity: | With filter 5.1 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…31 ft/lbs Install a new washer on the drain bolt. Only use an OE drain plug. |
| Notes: | (1) Synthetic oil is required. |
What kind of oil does a Subaru Legacy 2.5 take?
Oil Grade: SN
| Viscosity: | All TEMPS….0W-20 – If 0W-20 synthetic oil is not available,5W-30 conventional oil may be used if replenishment is needed but should be changed to 0W-20 synthetic oil at the next oil change. |
|---|---|
| Torque: | Oil Drain Plug…31 ft/lbs Install a new washer on the drain bolt. Only use an OE drain plug. |
Does Subaru need full synthetic oil?
Naturally aspirated engines in the newest Forester, Impreza, Legacy, Outback, and BRZ models as well as turbocharged models require Subaru Synthetic Motor Oil (or its equivalent).
What kind of oil do you put in a 2013 Subaru Legacy?
For example, a Subaru Legacy produced between 2013 and 2021 will need 0W-20 synthetic oil. By contrast, any Subaru Legacy produced between 2005 and ’10, these models will use synthetic 5W-30. Your engine type can also have an impact. For instance, a Legacy with a 6-cylinder engine might use 5W-30 instead of 0W-20.
How much oil does a 2.5 L Subaru engine take?
5.1 quarts
For the 2.5L 4-cylinder engine, the capacity is 5.1 quarts; for the 3.6L 6-cylinder engine, the capacity is 6.9 quarts. Again, you’ll want to check the level to make sure you don’t have too much or not enough oil.
Can I put 5W30 instead of 0w20 Subaru?
Synthetic oil-specifically 0W-20-is highly recommended for optimal engine performance and protection. If synthetic oil isn’t available at the time of an oil change, 5W-30 conventional oil may be used instead. However, it should be replaced with synthetic oil at the next change.
Can I put 5w30 instead of 0w20 Subaru?
Synthetic oil-specifically 0W-20-is highly recommended for optimal engine performance and protection. If synthetic oil isn’t available at the time of an oil change, 5W-30 conventional oil may be used instead. However, it should be replaced with synthetic oil at the next change.
