What kind of oil does a 2012 Toyota Sequoia take?

Oil Type for 2012 Toyota Sequoia
The 2012 Toyota Sequoia with the 5.7L 8-cylinder engine (engine code 3UR-FE) takes 8.5 quarts of 0W-20 synthetic oil. This is the recommended oil type for this vehicle, and a new oil filter and a crush washer are required for the oil change.
Oil Change Interval
For the 2012 Toyota Sequoia, the manufacturer has approved an oil change interval of 10,000 miles or 12 months if 0W-20 synthetic oil is used. However, it’s important to note that if the vehicle is equipped with a flex fuel-compatible engine, the 10,000-mile oil change interval has not been approved by Toyota. In such cases, a 5,000-mile/6-month oil change interval is still required .
Other Oil Capacities
In addition to the engine oil, the 2012 Toyota Sequoia has different automatic transmission oil capacities depending on the vehicle’s transmission configuration, ranging between 11.3 quarts and 11.7 quarts. The transfer case oil capacity is 3 pints, and the front and rear differentials also have specific oil capacities.
It’s important to adhere to Toyota’s recommended oil change intervals and use the specified oil type to ensure the optimal performance and longevity of the vehicle.
If you have any further questions or need additional information, feel free to ask!

What synthetic oil does Toyota recommend?

Only Toyota vehicles in which 0w-20 synthetic oil is required (except 3UR-FBE Engines*) have been approved for extended oil change intervals of 10,000-miles/12-months. (However, you should continue to check the oil level regularly and top off if needed. That will help your engine get the full benefit of synthetic oil.)

What oil does a 5.7 L take?

SAE 5W-20
However, the 5.7L HEMI® engine should be lubricated with a synthetic oil blend with a weight of SAE 5W-20. With the Pentastar® engine, you’ll need six quarts of oil to properly lubricate the engine system.

Does Toyota recommend full synthetic oil?

Toyota Oil Change FAQs and Pricing
Schedule your Toyota oil change online or by phone today! What Kind of Oil Do Toyota Models Require? It is recommended by the manufacturer to use certified and approved oil in your vehicle. Toyota recommends Toyota Genuine SAE 0W-20 Full-Synthetic motor oil for new vehicles.

What kind of oil does a 2013 Toyota Sequoia 5.7 take?

AMSOIL OE 0W-20 100% Synthetic Motor Oil.

What type of oil does a 2012 Toyota Sequoia take?

STP Full Synthetic Engine Oil 0W-20 5 Quart
0W-20.

What oil does Toyota 5.7 take?

8 liters 0W-20 Toyota Tundra motor oil, oil filter, and hardware for 2007-2021 5.7L V8 applications. RAVENOL fully synthetic USVO technology motor oil carries the Formal Licensed API SN resource conserving and ILSAC GF-5 oil specifications required for Toyota Tundra engines.

How much oil does a 5.7 Toyota Sequoia take?

8.5 quarts
With filter 8.5 quarts.

What kind of oil does a Toyota Sequoia take?

STP Standard Full Synthetic Engine Oil 0W-20 1 Quart
Notes: Full synthetic. 0W-20. 1 quart.

What engine oil is recommended for Toyota?

Genuine Toyota motor oil 0W-20 utilizes a Toyota-specific additive package that will provide the best results for oil performance and fuel economy. However, other 0W-20 synthetic oils can be used as long as they are ILSAC certified, which is found on the oil container label.

Does my Toyota need synthetic oil?

Most Toyota vehicles use synthetic or conventional motor oil. To verify which type of motor oil your vehicle needs, please take a look at the Owner’s Manual for your particular vehicle.