The 2010 Honda Accord Crosstour takes SAE 5W-20 motor oil. It requires 4.2-4.5 quarts of oil with a filter . Both conventional and synthetic oils are suitable for this vehicle, as long as the oil is changed as appropriate.
Contents
- Can I use 5w20 instead of 0w20?
- What type of oil does a Honda Crosstour use?
- Can I use 5w30 instead of 5w20?
- What type of oil does Honda Accord 2010 take?
- What kind of oil does a Honda Accord 4 cylinder take?
- What oil does 2010 Honda Crosstour use?
- Does Honda Accord 2010 take synthetic oil?
- Can I use 5w30 instead of 5w20 in my Honda Accord?
- What kind of oil does a Honda Crosstour take?
- Does Honda Accord need full synthetic oil?
Can I use 5w20 instead of 0w20?
Both 5w-20 and 0w-20 are IDENTICAL once the car is up to temperature. The difference is how thin those oils are when the car is cold. Neither the 0w or the 5w flow enough in the cold to properly lubricate your engine. However, the 0W is thinner and does LESS damage at start up than the 5W oil.
What type of oil does a Honda Crosstour use?
Mobil 1 – Advanced Full Synthetic Engine Oil 0W-20, 1 Quart (Part No. 44968)
Can I use 5w30 instead of 5w20?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won’t cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it’s best to stick with it.
What type of oil does Honda Accord 2010 take?
5W-20
Oil Grade: API*
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 4.2 quarts. w/of. After refill check oil level. |
| Capacity: | 4.5 quarts (with filter). After refill check oil level. |
| Torque: | 29 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug. |
What kind of oil does a Honda Accord 4 cylinder take?
The recommended Honda Accord oil type is 0W-20.
This is a synthetic oil that will keep the turbocharged engine in your Accord running smoothly on Irvine area roads and beyond.
What oil does 2010 Honda Crosstour use?
Oil Grade: API*
| Viscosity: | All TEMPS….0W-20 |
|---|---|
| Capacity: | Without filter 4.2 quarts. After refill check oil level. |
| Capacity: | With filter 4.5 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…29 ft/lbs Install a new washer on the drain bolt. Only use an OE drain plug. |
Does Honda Accord 2010 take synthetic oil?
Notes: Full synthetic. 5W-20.
Can I use 5w30 instead of 5w20 in my Honda Accord?
5w20 and 5w30 is interchangeable, meaning you can use 5w20 in an engine that recommends 5w30, and you can use 5w30 in an engine that recommends 5w20. It’s not a big deal.
What kind of oil does a Honda Crosstour take?
Out of the 18,498 reviews in this category, some of the top rated parts include Platinum 0W-20 Full Synthetic Motor Oil, 5 Quart with 4.9 stars and Platinum 0W-20 Full Synthetic Motor Oil, 1 Quart with 4.9 stars.
Does Honda Accord need full synthetic oil?
American Honda recommends using Honda Genuine Motor Oil, sold and available at Honda dealers . If Honda Genuine Motor Oil is not used, conventional motor oil of a premium-grade or an ultimate full synthetic blend may be used and must contain the specified viscosity grade indicated in your Owner’s Manual.
