What kind of oil does a 2010 Acura MDX take?

The 2010 Acura MDX takes 5W-20 Synthetic Motor Oil. It requires 4.5 quarts of oil with a filter or 4.2 quarts without a filter.

Does Acura MDX need full synthetic oil?

The first thing is the type of engine your car has. We recommend that you use full synthetic oil in your Acura MDX, which is designed to be the highest quality motor oil for your vehicle.

What engine oil does Acura MDX use?

The Acura MDX oil type can vary depending on your specific model. However, you can expect to use regular or fully synthetic 0W-20 or 5W-20 motor oil as long as it meets API certifications.

Does Acura MDX require synthetic oil?

Your Acura MDX doesn’t necessarily need synthetic oil; however, it is the oil that will give your vehicle the highest level of performance. Read on to learn more about this luxury vehicle.

Does Acura MDX need synthetic oil?

The first thing is the type of engine your car has. We recommend that you use full synthetic oil in your Acura MDX, which is designed to be the highest quality motor oil for your vehicle.

Can I use 5w30 instead of 5w20?

Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won’t cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it’s best to stick with it.

What oil does Acura recommend?

Acura Genuine Motor Oil
Acura recommends using Acura Genuine Motor Oil, sold and available at Acura dealers. If Acura Genuine Motor Oil is not used, conventional motor oil of a premium-grade or an ultimate full synthetic blend may be used and must contain the specified viscosity grade indicated in your Owner’s Manual.

How much oil does a 3.5 L Acura MDX take?

5.7 quarts
Oil Grade: API*

Viscosity:	All TEMPS….0W-20
Capacity:	With filter 5.7 quarts. After refill check oil level.
Capacity:	Without filter 5.4 quarts. After refill check oil level.
Torque:	Oil Drain Plug…30 ft/lbs Install a new washer on the drain bolt. Only use an OE drain plug.

What kind of oil does a 2010 Acura take?

The type of oil recommended for your Acura TL depends on the year. If you own a TL between model years 2004-2014, your engine’s recommended oil is 5W-20, a fully synthetic oil; if your Acura TL model is even older, from model years 1999-2003, the most versatile and safe oil to use in your engine is 5W-30 synthetic oil.

What oil does a Acura MDX 2010 take?

The type of oil recommended for the Acura MDX is 0W-20 or 5W-20 in the Pooler region. 0W-20 is a full synthetic oil and 5W-20 is available as a blend.

Does Acura require full synthetic oil?

Unlike some other carmakers, Acura and Honda don’t specify whether drivers should use synthetic oil or conventional engine oil. Instead, the original equipment manufacturer suggests that drivers choose an engine oil with the “Starburst” certification symbol on the label.