Oil for a 2007 Honda CBR 600
The 2007 Honda CBR 600 takes 3 quarts of Honda GN4 10W-30 4-Stroke Motorcycle Oil for an oil change. This oil is recommended in the user manual for the CBR600RR. It’s important to note that the 2007 CBR 600 requires 3 quarts of oil when changing the oil filter with a new one, and about 1.6 quarts if leaving the old filter on.
When performing an oil change on a 2007 Honda CBR 600, it’s also recommended to use Honda GN4 10W-30 Fully Synthetic Oil. This oil is specifically mentioned as suitable for the CBR600RR.
It’s worth noting that the oil change kit available for the 2007 Honda CBR 600RR includes a new washer for the drain plug, which can be convenient for the oil change process. Additionally, the use of K&N Motorcycle Oil Filter is recommended for use with synthetic or conventional oils in the CBR600RR.
In summary, for a 2007 Honda CBR 600, it’s recommended to use 3 quarts of Honda GN4 10W-30 4-Stroke Motorcycle Oil or Honda GN4 10W-30 Fully Synthetic Oil for an oil change, along with a new washer for the drain plug and a suitable oil filter such as the K&N Motorcycle Oil Filter.
If you need further assistance or have any other questions, feel free to ask!
Contents
- What kind of gas does a Honda CBR 600 use?
- What kind of oil does a 2007 CBR 600rr take?
- How many miles per gallon does a 2007 CBR 600 get?
- How fast is a 2007 CBR600RR?
- What kind of oil does a Honda CBR 600 take?
- Can I use 10W 40 instead of 10W-30?
- How much oil does a CBR600RR hold?
- What oil does a 2008 Honda CBR 600RR take?
- What kind of oil does a 2006 Honda CBR600RR take?
- How much oil does a 2008 CBR 600 take?
What kind of gas does a Honda CBR 600 use?
Honda engines are certified and designed to run on regular unleaded gasoline. Gasoline is allowed, by regulation, to contain a variety of additives. The same regulation limits how much of some additives, such as alcohol, can be included in the fuel and still be sold as gasoline.
What kind of oil does a 2007 CBR 600rr take?
3 Quarts of Honda GN4 10W-30 4-Stroke Motorcylce Oil.
How many miles per gallon does a 2007 CBR 600 get?
Based on data from 45 vehicles, 1,215 fuel-ups and 151,185 miles of driving, the 2007 Honda CBR600RR gets a combined Avg MPG of 38.75 with a 0.36 MPG margin of error.
How fast is a 2007 CBR600RR?
157 mphPerformance
| Top gear time to speed: | |
| 40-60 mph | 3.5 sec. |
| 60-80 mph | 3.7 sec. |
| Measured top speed | 157 mph |
| Engine speed at 60 mph | 5506 rpm |
What kind of oil does a Honda CBR 600 take?
Valvoline 4T 10W-40.
Can I use 10W 40 instead of 10W-30?
Think of it this way: both oil grades are good for cold starts. But if you’re in a warmer climate or the engine runs a little hotter, 10W40 is the way to go. If you live someplace colder or the engine runs cooler, the 10W30 works better since it runs a little thinner in cooler temperatures.
How much oil does a CBR600RR hold?
Put in 3 quarts of the oil of your choice. Start the bike and let it run for a couple minutes. Shut it off and let it set for a bit. Then check the level in the sight glass and you should be fine.
What oil does a 2008 Honda CBR 600RR take?
Honda Pro HP4S Full Synthetic 4-Stroke Motor Oil 10W-30 32 oz.
What kind of oil does a 2006 Honda CBR600RR take?
10w-30Product information
| Manufacturer | Honda |
|---|---|
| Item Weight | 9 pounds |
| Batteries | 1 A batteries required. |
| Manufacturer Part Number | 08C35-A131M02; 15410-MFJ-D02 |
| Viscosity | 10w-30 |
How much oil does a 2008 CBR 600 take?
Buy 3 quarts of oil.
