Oil Type for 2007 Ford Explorer Sport Trac
The 2007 Ford Explorer Sport Trac can use different types of oil depending on the engine size. Here are the specific recommendations:
– 4.0L 6 cylinder engine: It requires 5.0 quarts of SAE 5W-30 full synthetic motor oil.
– 4.6L 8 cylinder engine: It requires 6.3 quarts of SAE 5W-20 full synthetic motor oil.
It’s important to use the manufacturer’s recommended oil with the lowest weight, even if it costs a bit more per change, as it provides optimum fuel economy and durability performance meeting all requirements for the vehicle’s engine.
Contents
- How many quarts of oil does a 2007 Ford Explorer take?
- Can I use 5W-30 instead of 5w20 in my Ford Explorer?
- What type of oil does a 2007 Ford Explorer use?
- Can I use 5W 30 to Ford Explorer?
- How many quarts of oil does a 2007 Ford Explorer Sport Trac take?
- How many quarts of oil does a 2007 Explorer Sport Trac 4.0 take?
- What kind of oil does a Ford Explorer Sport Trac take?
- Do Ford Explorers need synthetic oil?
- What kind of oil does a 2007 Ford Sport Trac take?
- What would happen if you put 5w30 instead of 5w20?
How many quarts of oil does a 2007 Ford Explorer take?
5 quarts
Oil Grade: SEO60
Viscosity: | All TEMPS….5W-30 |
---|---|
Capacity: | With filter 5 quarts. When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level. Top off to proper level as needed. |
Torque: | Oil Drain Plug…18 ft/lbs |
Can I use 5W-30 instead of 5w20 in my Ford Explorer?
Can I use 5w30 instead of 5w20 in my Ford? The Ford owner’s manual states that 5w20 oil provides the best fuel economy and durability performance for your car’s engine. If you use the higher thickness (30 weight), your gas mileage will definitely go down.
What type of oil does a 2007 Ford Explorer use?
The 4.0L V6 SOHC engine for the 2007 Ford Explorer needs 5 quarts of 5W30 synthetic oil while the 4.6L V8 engine option takes 6.3 quarts of 5W20 synthetic oil.
Can I use 5W 30 to Ford Explorer?
Motorcraft Semi-synthetic. 5w/30 in the Explorer, and 5w/20 in the F-150. Every 5000 miles. Motorcraft oil filters also.
How many quarts of oil does a 2007 Ford Explorer Sport Trac take?
The 4.0L 6 cylinder engine useS5. 0 quarts of SAE 5W-30 full synthetic motor oil, while the larger 4.6L 8 cylinder requireS6. 3 quarts of SAE 5W-20 full synthetic. In the absence of the recommended types, You can substitute SAE 5W-40 for 5W-30, and can substitute SAE 5W-30 for 5W-20.
How many quarts of oil does a 2007 Explorer Sport Trac 4.0 take?
5 quart
Notes: Conventional high mileage. 5W-30. 5 quart.
What kind of oil does a Ford Explorer Sport Trac take?
Mobil 1 – Extended Performance High Mileage Full Synthetic Motor Oil 5W-20, 5 Quart (Part No. 15020)
Do Ford Explorers need synthetic oil?
For example, you probably need full synthetic motor oil if you tow an RV or car with your Ford Super-Duty or frequently drive with your Ford Explorer on dirt roads. This type of motor oil is more expensive than conventional oil due to the additional processing.
What kind of oil does a 2007 Ford Sport Trac take?
Oil Grade: SEO15
Viscosity: | All TEMPS….5W-20 |
---|---|
Capacity: | With filter 6 quarts. After refill check oil level. |
Torque: | Oil Drain Plug…19 ft/lbs |
What would happen if you put 5w30 instead of 5w20?
Using 5W-30 instead can reduce fuel economy and impede flow throughout the engine. While using it temporarily in a pinch likely won’t cause your engine lasting harm, remember that the engineers who built your engine did so with a specific viscosity oil in mind, meaning it’s best to stick with it.