The 1991 Toyota Cressida requires engine oil for proper lubrication. While the specific type of oil may vary depending on factors such as climate and engine condition, it is generally recommended to use 10W-30 oil for the 1991 Toyota Cressida. It is important to consult the owner’s manual or contact a trusted auto parts store for the most accurate and up-to-date information on the recommended oil for your specific vehicle.
Contents
- What kind of oil does a 1991 Toyota v6 take?
- Can I use 10w30 instead of 5w30 Toyota?
- What oil does Toyota recommend?
- What is special about Toyota Cressida?
- What kind of oil does a 1988 Toyota Cressida take?
- What was the engine specs of the Toyota 7mge?
- What engine is in a 1991 Toyota Cressida?
- What is the value of a 1991 Toyota Cressida?
- How much oil does a 7mge Cressida take?
- How much oil does a 7mge take?
What kind of oil does a 1991 Toyota v6 take?
Oil Grade: SL
| Viscosity: | Below 50 F .5W-30 Above 0 F .10W-30, 10W-40 |
|---|---|
| Capacity: | RWD, With filter 4.5 quarts. After refill check oil level. |
| Capacity: | 4WD, With filter 4.8 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…18 ft/lbs |
Can I use 10w30 instead of 5w30 Toyota?
Yes. 5w30 and 10w30 are both 30 weight oils and the exact same thickness in your engine when it is at operating temperature. The 5w30 is better because it thickens less when cool or cold.
What oil does Toyota recommend?
Genuine Toyota motor oil 0W-20 utilizes a Toyota-specific additive package that will provide the best results for oil performance and fuel economy. However, other 0W-20 synthetic oils can be used as long as they are ILSAC certified, which is found on the oil container label.
What is special about Toyota Cressida?
Available either as a four-door sedan or a station wagon, the new Cressida is Toyota’s most American car to date, a triumph of Japanese market research and technological cloning. It is a very good car. Its engine performs faultlessly and its automatic-overdrive transmission is smooth and sure.
What kind of oil does a 1988 Toyota Cressida take?
Oil Grade: SL
| Viscosity: | Above -9 F .10W-30, 10W-40, 10W-50 Above 10 F .15W-40, 20W-40, 20W-50 |
|---|---|
| Capacity: | With filter 5.4 quarts. After refill check oil level. |
| Torque: | Oil Drain Plug…25 ft/lbs |
What was the engine specs of the Toyota 7mge?
The Toyota 7M-GE introduced in the early months of 1986 is a 3.0 litre (2954 cc) 24-valve (4 valves per cylinder) DOHC/fuel injected engine. The valves are spaced at a performance-oriented 50° angle. Cylinder bore is 83 mm (3.27 in) and stroke is 91 mm (3.58 in). The 7M-GE was produced from 1986 through 1992.
What engine is in a 1991 Toyota Cressida?
The Toyota 7M-GE introduced in the early months of 1986 is a 2,954 cc (3.0 L) 24-valve (4 valves per cylinder) DOHC/fuel-injected engine. The valves are spaced at a performance-oriented 50° angle. Cylinder bore and stroke is 83 mm × 91 mm (3.27 in × 3.58 in). The 7M-GE was produced from 1986 through 1992.
What is the value of a 1991 Toyota Cressida?
The value of a used 1991 Toyota Cressida ranges from $1,526 to $8,533, based on vehicle condition, mileage, and options.
How much oil does a 7mge Cressida take?
Capacity: With filter 4.6 quarts. After refill check oil level.
How much oil does a 7mge take?
Oil Grade: SL
Capacity: Late Prod, With filter 4.6 quarts.
